ALUMINUM ELECTROLYTIC CAPACITORS
Screw Terminal Type, 85°C Standard
LNR
Load life of 5000 hours application of rated ripple current at 85
.
°C
Extended rarge up to φ100 × 250L size.
LNT
LNY
Compliant to the RoHS directive (2011/65/EU).
High
High
Temperature
Voltage
LNR
Specifications
Item
Performance Characteristics
40 to +85°C (10 to 100V) , – 25 to +85°C (160 to 250V)
Category Temperature Range
Rated Voltage Range
–
10 to 250V
Rated Capacitance Range
Capacitance Tolerance
1000 to 2200000µF
20% at 120Hz, 20°C
3
After 5 minutes' application of rated voltage, leakage current is not more than
[C:Rated Capacitance (µF) , V:Voltage(V)]
(µA) or 5 mA, whichever is smaller (at 20°C) .
CV
Leakage Current
Tangent of loss angle
See refer to next page (Measurement frequency : 120Hz at 20°C)
(tan δ) (MAX)
Measurement frequeny : 120Hz
160 to 250
10 to 100
40°C / Z+20°C
12
Rated voltage(V)
Stability at Low Temperature
Endurance
Z
–
Z
–
25°C / Z+20°C
8
Impedance ratio ZT/Z20(MAX.)
The specifications listed at right shall be met when the
capacitors are restored to 20°C after D.C. bias plus rated
ripple current is applied for 5000 hours at 85°C, the peak
voltage shall not exceed the rated voltage.
Within 15% of the initial capacitance value
175% or less than the initial specified value
Less than or equal to the initial specified value
Capacitance change
tan δ
Leakage current
After storing the capacitors under no load at 85°C
for 1000 hours and then performing voltage treatment
based on JIS C 5101-4 clause 4.1 at 20°C,
Within 20% of the initial capacitance value
175% or less than the initial specified value
Less than or equal to the initial specified value
Capacitance change
tan δ
Shelf Life
Marking
Leakage current
they shall meet the requirements listed at right.
Printed with black color letter on light blue sleeve.
Drawing
Type numbering system (Example : 250V 2200 F)
µ
1
2
3
4
5
6
7
8
9 10 11 12
φ35 Screw terminal type
L N R 2 E 2 2 2 M S E
Mounting bracket
Hexagenal headed bolt (M5)
Configuration
Bottom plate
Sleeve
(
)
Capacitance tolerance 20%
Pressure relief vent
(
)
)
Rated capacitance 2200µF
(
Rated voltage 250V
Series name
Type
+
7
±0
24
Configuration
Cr (III) Plating
±5±0.5
L+3MAX.
29±±
(RoHS compliant)
6±±
SE
Please refer to page 334 for schematic of dimensions.
Please contact to us if PVCless products are required.
Dimension table in next page.
335