LMV301
www.ti.com
SNOS968A –MAY 2004–REVISED MAY 2013
LMV301 Low Input Bias Current, 1.8V Op Amp w/ Rail-to-Rail Output
Check for Samples: LMV301
1
FEATURES
DESCRIPTION
The LMV301 CMOS operational amplifier is ideal for
single supply, low voltage operation with an ensured
operating voltage range from 1.8V to 5V. The low
input bias current of less than 0.182pA typical,
eliminates input voltage errors that may originate from
small input signals. This makes the LMV301 ideal for
electrometer applications requiring low input leakage
such as sensitive photodetection transimpedance
amplifiers and sensor amplifiers. The LMV301 also
features a rail-to-rail output voltage swing in addition
to a input common-mode range that includes ground.
The LMV301 will drive a 600Ω resistive load and up
to 1000pF capacitive load in unity gain follower
applications. The low supply voltage also makes the
LMV301 well suited for portable two-cell battery
systems and single cell Li-Ion systems.
2
•
•
•
•
•
Input Bias Current: 0.182 pA
Gain Bandwidth Product: 1 MHz
Supply Voltage at 1.8V: 1.8 to 5 V
Supply Current: 150 µA
Input Referred Voltage Noise at 1kHz:
40nV/√Hz
•
•
•
DC Gain (600Ω Load): 100 dB
Output Voltage Range at 1.8V: 0.024 to 1.77 V
Input Common-Mode Voltage Range: −0.3 to
±1.2 V
APPLICATIONS
•
•
•
•
•
Thermocouple Amplifiers
Photo Current Amplifiers
Transducer Amplifiers
The LMV301 exhibits excellent speed-power ratio,
achieving 1MHz at unity gain with low supply current.
The high DC gain of 100dB makes it ideal for other
low frequency applications.
Sample and Hold Circuits
Low Frequency Active Filters
The LMV301 is offered in a space saving SC70
package, which is only 2.0X2.1X1.0mm. It is also
similar to the LMV321 except the LMV301 has a
CMOS input.
Connection Diagram
Applications Circuit
Top View
Figure 2. Low Leakage Sample and Hold
Figure 1. SC70-5 Package
See Package Number DCK0005A
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2013, Texas Instruments Incorporated