LMP7701, LMP7702, LMP7704
www.ti.com
SNOSAI9H –SEPTEMBER 2005–REVISED MARCH 2013
LMP7701/LMP7702/LMP7704 Precision, CMOS Input, RRIO, Wide Supply Range Amplifiers
Check for Samples: LMP7701, LMP7702, LMP7704
1
FEATURES
DESCRIPTION
The LMP7701/LMP7702/LMP7704 are single, dual,
and quad low offset voltage, rail-to-rail input and
output precision amplifiers each with a CMOS input
23
•
Unless Otherwise Noted,
Typical Values at VS = 5V
–
Input Offset Voltage (LMP7701): ±200 µV
(max)
stage and
a wide supply voltage range. The
LMP7701/LMP7702/LMP7704 are part of the LMP™
precision amplifier family and are ideal for sensor
interface and other instrumentation applications.
–
Input Offset Voltage (LMP7702/LMP7704):
±220 µV (max)
–
–
–
–
–
–
–
–
–
–
–
–
Input Bias Current: ±200 fA
Input Bias Current: ±200 fA
Input Voltage Noise: 9 nV/√Hz
CMRR: 130 dB
The specified low offset voltage of less than ±200 µV
along with the specified low input bias current of less
than ±1 pA make the LMP7701 ideal for precision
applications. The LMP7701/LMP7702/LMP7704 are
built utilizing VIP50 technology, which allows the
combination of a CMOS input stage and a 12V
common mode and supply voltage range. This makes
the LMP7701/LMP7702/LMP7704 great choices in
many applications where conventional CMOS parts
cannot operate under the desired voltage conditions.
Open Loop Gain: 130 dB
Temperature Range: −40°C to 125°C
Unity Gain Bandwidth: 2.5 MHz
Supply Current (LMP7701): 715 µA
Supply Current (LMP7702): 1.5 mA
Supply Current (LMP7704): 2.9 mA
Supply Voltage Range: 2.7V to 12V
Rail-to-Rail Input and Output
The LMP7701/LMP7702/LMP7704 each have a rail-
to-rail input stage that significantly reduces the CMRR
glitch commonly associated with rail-to-rail input
amplifiers. This is achieved by trimming both sides of
the complimentary input stage, thereby reducing the
difference between the NMOS and PMOS offsets.
The output of the LMP7701/LMP7702/LMP7704
swings within 40 mV of either rail to maximize the
signal dynamic range in applications requiring low
supply voltage.
APPLICATIONS
•
•
•
•
•
•
High Impedance Sensor Interface
Battery Powered Instrumentation
High Gain Amplifiers
DAC Buffer
The LMP7701 is offered in the space saving 5-Pin
SOT-23 and 8-Pin SOIC package. The LMP7702 is
offered in the 8-Pin SOIC and 8-Pin VSSOP package.
The quad LMP7704 is offered in the 14-Pin SOIC and
14-Pin TSSOP package. These small packages are
ideal solutions for area constrained PC boards and
portable electronics.
Instrumentation Amplifier
Active Filters
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
LMP is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated