LMP2232
www.ti.com
SNOSB02C –JANUARY 2008–REVISED MARCH 2013
LMP2232 Dual Micropower, 1.6V, Precision, Operational Amplifier with CMOS Input
Check for Samples: LMP2232
1
FEATURES
DESCRIPTION
The LMP2232 is
a dual micropower precision
23
(For VS = 5V, Typical Unless Otherwise Noted)
amplifier designed for battery powered applications.
The 1.6V to 5.5V operating supply voltage range and
quiescent power consumption of only 26 μW extend
the battery life in portable systems. The LMP2232 is
part of the LMP™ precision amplifier family. The high
impedance CMOS input makes it ideal for
•
•
•
•
•
•
•
•
•
•
•
•
Supply Current at 1.8V 16 µA
Operating Voltage Range 1.6V to 5.5V
Low TCVOS ±0.5 µV/°C (max)
VOS ±150 µV (max)
Input Bias Current 20 fA
PSRR 120 dB
instrumentation
applications.
and
other
sensor
interface
CMRR 97 dB
The LMP2232 has a maximum offset voltage of 150
μV and maximum offset voltage drift of only 0.5 μV/°C
along with low bias current of only ±20 fA. These
precise specifications make the LMP2232 a great
choice for maintaining system accuracy and long term
stability.
Open Loop Gain 120 dB
Gain Bandwidth Product 130 kHz
Slew Rate 58 V/ms
Input Voltage Noise, f = 1 kHz 60 nV/√Hz
Temperature Range –40°C to 125°C
The LMP2232 has a rail-to-rail output that swings 15
mV from the supply voltage, which increases system
dynamic range. The common mode input voltage
range extends 200 mV below the negative supply,
thus the LMP2232 is ideal for ground sensing in
single supply applications.
APPLICATIONS
•
•
•
•
•
Precision Instrumentation Amplifiers
Battery Powered Medical Instrumentation
High Impedance Sensors
The LMP2232 is offered in 8-pin SOIC and VSSOP
packages.
Strain Gauge Bridge Amplifier
Thermocouple Amplifiers
The LMP2231 is the single version of this product
and the LMP2234 is the quad version of this product.
Both of these products are available on Texas
Instruments' website.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
LMP is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated