April 1998
LMC662
CMOS Dual Operational Amplifier
n Ultra low input bias current: 2 fA
General Description
n Input common-mode range includes V−
n Operating range from +5V to +15V supply
The LMC662 CMOS Dual operational amplifier is ideal for
operation from a single supply. It operates from +5V to +15V
and features rail-to-rail output swing in addition to an input
common-mode range that includes ground. Performance
limitations that have plagued CMOS amplifiers in the past
are not a problem with this design. Input VOS, drift, and
broadband noise as well as voltage gain into realistic loads
(2 kΩ and 600Ω) are all equal to or better than widely ac-
cepted bipolar equivalents.
=
n ISS 400 µA/amplifier; independent of V+
n Low distortion: 0.01% at 10 kHz
n Slew rate: 1.1 V/µs
n Available in extended temperature range (−40˚C to
+125˚C); ideal for automotive applications
n Available to a Standard Military Drawing specification
This chip is built with National’s advanced Double-Poly
Silicon-Gate CMOS process.
Applications
n High-impedance buffer or preamplifier
n Precision current-to-voltage converter
n Long-term integrator
See the LMC660 datasheet for a Quad CMOS operational
amplifier with these same features.
n Sample-and-hold circuit
n Peak detector
n Medical instrumentation
n Industrial controls
Features
n Rail-to-rail output swing
n Specified for 2 kΩ and 600Ω loads
n High voltage gain: 126 dB
n Low input offset voltage: 3 mV
n Low offset voltage drift: 1.3 µV/˚C
n Automotive sensors
Connection Diagram
8-Pin DIP/SO
DS009763-1
Ordering Information
Package
Temperature Range
NSC
Transport
Media
Drawing
Military
Extended
Industrial Commercial
8-Pin
LMC662AMJ/883
J08A
M08A
N08E
Rail
Ceramic DIP
8-Pin
LMC662EM LMC662AIM LMC662CM
LMC662EN LMC662AIN LMC662CN
Rail,
Tape and Reel
Rail
Small Outline
8-Pin
Molded DIP
8-Pin
Side Brazed
Ceramic DIP
LMC662AMD
D08C
Rail
© 1999 National Semiconductor Corporation
DS009763
www.national.com