Ordering information
AC-DC Power Supplies Medical Type
LM
A
100
F
-O -O
5 6
LMA100F
1
2
3
4
1Series name
2Single output
3Output wattage
4Universal input
5Output voltage
Example recommended EMI/EMC filter
NAM-04-101
R
*1
6Optional
C: with Coating
G: Low leakage current
H : with the function to be acceptable
to output peak current
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
J1: VH(J.S.T.)connector type
*
A higher current rating EMI/EMC filter
may be recommended in view of the
other devices that could be connected
in parallel with the power supply.
R: with Remote ON/OFF
R2: with Remote ON/OFF
S : with Chassis
SN: with Chassis & cover
P :Setting in the overcurrent
protection rating
This power supply is manufactured by SMD technology. The stress to P.C.B like twisting or bending causes the defect of the unit, so handle the unit with care.
*Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations.
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
LMA100F-24-Y
103.2
24V 4.3A
LMA100F-24-HY
*2
103.2 (206.4)
*2
24V 4.3A (8.6A)
SPECIFICATIONS
MODEL
LMA100F-24-Y
LMA100F-24-HY
VOLTAGE[V]
AC85 - 264 1f
ACIN 100V 1.4typ (Io=100%)
ACIN 200V 0.7typ (Io=100%)
CURRENT[A]
FREQUENCY[Hz]
50 / 60 (47 - 63)
ACIN 100V 84.0typ (Io=100%)
ACIN 200V 86.0typ (Io=100%)
ACIN 100V 0.99typ (Io=100%)
ACIN 200V 0.95typ (Io=100%)
ACIN 100V 15typ (Io=100%) (At cold start) (Ta=25C)
ACIN 200V 30typ (Io=100%) (At cold start) (Ta=25C)
84.0typ (Io=100%)
86.0typ (Io=100%)
EFFICIENCY[%]
INPUT
POWER FACTOR
INRUSH CURRENT[A]
LEAKAGE CURRENT[mA]
VOLTAGE[V]
CURRENT[A]
LINE REGULATION[mV]
LOAD REGULATION[mV]
0.10 / 0.25max (ACIN 100V / 240V 60Hz, Io=100%, According to IEC60601-1)
24
24
*2
4.3
96max
150max
4.3 (Peak 8.6)
96max
*7
*7
150max
120max
160max
150max
180max
240max
290max
96max
0 to +50C 120max
-10 - 0C 160max
0 to +50C 150max
-10 - 0C 180max
0 to +50C 240max
*3
RIPPLE[mVp-p]
*3
RIPPLE NOISE[mVp-p]
OUTPUT
TEMPERATURE REGULATION[mV]
-10 to +50
C
290max
96max
*
4
DRIFT[mV]
START-UP TIME[ms]
HOLD-UP TIME[ms]
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
350typ (ACIN 100V, Io=100%)
20typ (ACIN 100V, Io=100%)
19.20 to 27.50
19.20 to 27.50
24.00 to 24.96
OUTPUT VOLTAGE SETTING[V]
24.00 to 24.96
OVERCURRENT PROTECTION Works over 105% of rating (works over 101% of peak current at option -H) and recovers automatically
OVERVOLTAGE PROTECTION[V] 27.60 to 33.60 27.60 to 33.60
PROTECTION
CIRCUIT AND OPERATING INDICATION
Not provided
OTHERS
REMOTE SENSING
REMOTE ON/OFF
INPUT-OUTPUT RC
Not provided
Option (Required external power source.)
.
*6
AC4,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) 2MOOP
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MWmin (At Room Temperature) 1MOOP
AC500V 1minute, Cutoff current = 25mA, DC500V 50MWmin (At Room Temperature)
AC100V 1minute, Cutoff current = 25mA, DC100V 10MWmin (At Room Temperature)
-10 to +70C, 20 - 90%RH (Non condensing), 3,000m (10,000feet) max
INPUT-FG
ISOLATION
.
*6
*6
*5
OUTPUT RC-FG
OUTPUT-RC
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
ENVIRONMENT
2
VIBRATION
IMPACT
10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each along X, Y and Z axis
196.1m/s (20G), 11ms, once each X, Y and Z axis
2
AGENCY APPROVALS (AT ONIY AC input) ANSI/AAMI ES60601-1, EN60601-1 3rd, Complies with IEC60601-1-2 4th Ed.
SAFETY AND
NOISE
REGULATIONS
CONDUCTED NOISE
HARMONIC ATTENUATOR
CASE SIZE/WEIGHT
COOLING METHOD
Complies with FCC-B, VCCI-B, CISPR22-B, EN55011-B, EN55022-B
*8
Complies with IEC61000-3-2 (Class A)
62X33X155mm [2.44X1.30X6.10 inches] (WXHXD) / 290g max (with chassis & cover : 470g max)
OTHERS
*5
Convection
*1 Specification is changed at option, refer to Instruction Manual.
*2 Peak loading for 10sec. And Duty 40% max.
*4 Drift is the change in DC output for an eight hour period *
after a half-hour warm-up at 25C, with the input voltage *
To meet the specifications. Do not operate over-loaded condition.
Parallel operation is not possible.
( ) means peak current. There is a possibility that an internal device
is damaged when the specification is exceeded.
held constant at the rated input/output.
*
*
Derating is required when operated with chassis and cover.
Sound noise may be generated by power supply in case of pulse load.
*5 Derating is required.
*3 This is the value that measured on measuring board with capacitor of *6 Applicable when remote control (optional) is added.
22mF at 150mm from output terminal.
*7 Please contact us about dynamic load and input response.
Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent *8 Please contact us about another class.
to KEISOKU-GIKEN: RM103).
LMA-2
5秒后页面跳转
SK海力士量产12层HBM3E，容量高达36GB
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
摩尔斯微电子在美国约书亚树国家公园测试 Wi-Fi HaLow
贸泽上架Tallysman TW5386智能GNSS天线
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
