OBSOLETE
LM9072
www.ti.com
SNVS134D –DECEMBER 1999–REVISED APRIL 2013
LM9072 Dual Tracking Low-Dropout System Regulator
Check for Samples: LM9072
1
FEATURES
DESCRIPTION
The LM9072 is a high performance voltage regulator
system with operational and protection features that
address many requirements of automotive
2
•
Two 5V Regulated Outputs:
–
–
350 mA, 2% Main Output
80 mA, 1.5% Tracking Output
applications. Two regulated outputs are provided. The
main regulator provides a precision 2% maximum
tolerance 5V output at 350mA with a low dropout
characteristic. The second regulator provides a 5V
output that tracks the main regulator output voltage
within 1.5% with load currents up to 80mA. The
tracking output is ideal for use in powering remotely
located sensors with outputs that are ratiometric to
the main system supply. This output is fully protected
from short circuits to ground or the unregulated input
supply (ignition or battery potentials in automotive
applications).
•
•
Good EMI (1 MHz to 400 MHz, BCI) Immunity
Separate ON/OFF and Keep-Alive Control
Inputs
•
Less Than 100 μA Quiescent Current in OFF
State
•
•
•
Programmable Delayed Reset Output
Input Transient Protection Over 60V to −45V
Tracking Output Protected From Shorts to
Battery
•
•
•
Less Than 1V Dropout at Full Load
The LM9072 also contains a programmable delayed
system reset output. Two control inputs are provided.
An ON/OFF input intended for connection to an
ignition switch, and a Keep Alive input to allow a
system to remain powered after ignition has been
switched OFF.
−40°C to +125°C Operating Temperature Range
Surface Mount SFM Power Package
TYPICAL APPLICATIONS
•
Automotive Module Supply Power
Conditioning
For EMC concerns the LM9072 remains fully
operational and does not generate false rest signals
while subjected to, 1MHz to 400 MHz bulk current
injection signals greater than 100 mA on the input
supply and tracking output lines.
•
•
•
Remote Sensor Biasing
Ratiometric to Supply Sensor Detection
Continuous Operation for Save Routines and
EPROM Programming After Power Down
Command
•
Safety Related Systems—EMC Operational
CONNECTION DIAGRAM
Backside metal is internally connected to ground.
9-Lead SFM
Surface Mount Power Package
9-Lead TO-220 Package
Figure 1. See Package Number KTW
Figure 2. See Package Number TA9A
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated