Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM8262
SNOS975G –MAY 2001–REVISED AUGUST 2015
LM8262 Dual RRIO, High Output Current and Unlimited Cap Load Op Amp in VSSOP
1 Features
3 Description
The LM8262 is a Rail-to-Rail input and output Op
Amp which can operate with a wide supply voltage
range. This device has high output current drive,
greater than Rail-to-Rail input common mode voltage
range, unlimited capacitive load drive capability, and
provides tested and ensured high speed and slew
rate. It is specifically designed to handle the
requirements of flat panel TFT panel VCOM driver
applications as well as being suitable for other low
power and medium speed applications which require
ease of use and enhanced performance over existing
devices.
1
(VS = 5V, TA = 25°C, Typical Values Unless
Specified).
•
•
•
•
•
•
•
GBWP 21MHz
Wide Supply Voltage Range 2.5 V to 22 V
Slew Rate 12V/µs
Supply Current/channel 1.15 mA
Cap Load Limit Unlimited
Output Short Circuit Current +53mA/−75 mA
+/−5% Settling Time 400ns (500 pF, 100 mVPP
step)
Greater than Rail-to-Rail input common mode voltage
range with 50 dB of Common Mode Rejection allows
high side and low side sensing for many applications
without concern for exceeding the range and with no
compromise in accuracy. In addition, most device
parameters are insensitive to power supply variations.
This design enhancement is yet another step in
simplifying its usage. The output stage has low
•
•
•
•
Input Common Mode Voltage 0.3 V Beyond Rails
Input Voltage Noise 15nV/√Hz
Input Current Noise 1pA/√Hz
THD+N < 0.05%
2 Applications
•
•
•
•
TFT-LCD Flat Panel VCOM driver
A/D Converter Buffer
distortion (0.05% THD+N) and can supply
a
respectable amount of current (15 mA) with minimal
headroom from either rail (300 mV).
High Side/low Side Sensing
Headphone Amplifier
The LM8262 is offered in the space saving VSSOP
package.
Device Information(1)
PART NUMBER
LM8262
PACKAGE
BODY SIZE (NOM)
VSSOP (8)
3.00 mm × 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Output Response with Heavy Capacitive Load
Gain/Phase vs. Frequency
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.