5秒后页面跳转
LM80 PDF预览

LM80

更新时间: 2024-09-23 22:31:11
品牌 Logo 应用领域
美国国家半导体 - NSC 微处理器监控
页数 文件大小 规格书
29页 438K
描述
Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor

LM80 数据手册

 浏览型号LM80的Datasheet PDF文件第2页浏览型号LM80的Datasheet PDF文件第3页浏览型号LM80的Datasheet PDF文件第4页浏览型号LM80的Datasheet PDF文件第5页浏览型号LM80的Datasheet PDF文件第6页浏览型号LM80的Datasheet PDF文件第7页 
June 1999  
LM80  
Serial Interface ACPI-Compatible Microprocessor System  
Hardware Monitor  
n WATCHDOG comparison of all monitored values  
n Separate input to show status in Interrupt Status  
Register of additional external temperature sensors such  
General Description  
The LM80 provides 7 positive voltage inputs, temperature  
measurement, fan speed measurement, and hardware  
as the LM56 or LM75  
2
monitoring on an I C  
interface. The LM80 performs  
n I2C Serial Bus interface compatibility  
WATCHDOG comparisons of all measured values and an  
open-drain interrupt output becomes active when any values  
exceed programmed limits. A Chassis Intrusion input is pro-  
vided to monitor and reset an external circuit designed to  
latch a chassis intrusion event.  
n Shutdown mode to minimize power consumption  
n Programmable RST_OUT/OS pin: RST_OUT provides a  
Reset output; OS provides an Interrupt Output activated  
by an Overtemperature Shutdown event  
The LM80 is especially suited to interface to both linear and  
digital temperature sensors. The 10 mV LSB and 2.56 volt  
input range is ideal for accepting inputs from a linear sensor  
such as the LM50. The BTI is used as an input from either  
digital or thermostat sensors such as LM75 and LM56.  
Key Specifications  
n Voltage monitoring Error  
±
1% (max)  
n Temperature Error  
±
−25˚C to +125˚C  
3˚C (max)  
The LM80’s 2.8V to 5.75V supply voltage range, low supply  
current, and I2C interface make it ideal for a wide range of  
applications. These include hardware monitoring and protec-  
tion applications in personal computers, electronic test  
equipment, and office electronics.  
n Supply Voltage Range  
n Supply Current  
2.8V to  
5.75V  
Operating:  
Shutdown:  
0.2 mA typ  
15 µA typ  
8 Bits  
n ADC Resolution  
Features  
n Temperature sensing  
n Temperature Resolution  
0.5˚C  
n 7 positive voltage inputs  
n 2 programmable fan speed monitoring inputs  
n 10 mV LSB and 2.56V input range accepts outputs from  
linear temperature sensors such as the LM50  
n Chassis Intrusion Detector input  
Applications  
n System Thermal and Hardware Monitoring for Servers  
and PCs  
n Office Electronics  
n Electronic Test Equipment and Instrumentation  
Typical Application  
DS100040-1  
# Indicates Active Low (“Not”)  
TRI-STATE® is a registered trademark of National Semiconductor Corporation.  
WATCHDOG is a trademark of National Semiconductor Corporation.  
2
I
C® is a registered trademark of the Philips Corporation.  
© 1999 National Semiconductor Corporation  
DS100040  
www.national.com  

与LM80相关器件

型号 品牌 获取价格 描述 数据表
LM80_01 NSC

获取价格

Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
LM8003 UTC

获取价格

3 SIRENS AND MACHINE GUN WITH 2 LEDS
LM8003_15 UTC

获取价格

3 SIRENS AND MACHINE GUN WITH 2 LEDS
LM8031_SERIES ETC

获取价格

LM8050I ONSEMI

获取价格

TRANSISTOR 800 mA, 25 V, NPN, Si, SMALL SIGNAL TRANSISTOR, TO-92, TO-226, 3 PIN, BIP Gener
LM8050I/D ETC

获取价格

Amplifier Transistors
LM8050J ONSEMI

获取价格

800mA, 25V, NPN, Si, SMALL SIGNAL TRANSISTOR, TO-92, TO-226, 3 PIN
LM8051_SERIES ETC

获取价格

LM8061 ETC

获取价格

LM8062 ETC

获取价格