LM7321, LM7322
www.ti.com
SNOSAW8D –MAY 2008–REVISED MARCH 2013
LM7321/LM7321Q Single/ LM7322/LM7322Q Dual Rail-to-Rail Input/Output ±15V, High
Output Current and Unlimited Capacitive Load Operational Amplifier
Check for Samples: LM7321, LM7322
1
FEATURES
DESCRIPTION
The LM7321/LM7321Q/LM7322/LM7322Q are rail-to-
rail input and output amplifiers with wide operating
2
•
(VS = ±15, TA = 25°C, Typical Values Unless
Specified.)
voltages
and
high
output
currents.
The
•
•
•
•
•
•
Wide Supply Voltage Range 2.5V to 32V
Output Current +65 mA/−100 mA
Gain Bandwidth Product 20 MHz
Slew Rate 18 V/µs
LM7321/LM7321Q/LM7322/LM7322Q are efficient,
achieving 18 V/µs slew rate and 20 MHz unity gain
bandwidth while requiring only 1 mA of supply current
per
op
amp.
The
LM7321/LM7321Q/LM7322/LM7322Q performance is
fully specified for operation at 2.7V, ±5V and ±15V.
Capacitive Load Tolerance Unlimited
Input Common Mode Voltage 0.3V Beyond
Rails
The
designed to drive unlimited capacitive loads without
oscillations. All LM7321/LM7321Q and
LM7321/LM7321Q/LM7322/LM7322Q
are
•
•
•
•
•
•
Input Voltage Noise 15 nV/√Hz
Input Current Noise 1.3 pA/√Hz
Supply Current/Channel 1.1 mA
Distortion THD+Noise −86 dB
Temperature Range −40°C to 125°C
LM7322/LM732Q parts are tested at −40°C, 125°C,
and 25°C, with modern automatic test equipment.
High performance from −40°C to 125°C, detailed
specifications, and extensive testing makes them
suitable
for
industrial,
automotive,
and
communications applications.
Tested at −40°C, 25°C and 125°C at 2.7V, ±5V,
Greater than rail-to-rail input common mode voltage
range with 50 dB of common mode rejection across
this wide voltage range, allows both high side and low
side sensing. Most device parameters are insensitive
to power supply voltage, and this makes the parts
easier to use where supply voltage may vary, such as
automotive electrical systems and battery powered
equipment. These amplifiers have true rail-to-rail
output and can supply a respectable amount of
current (15 mA) with minimal head- room from either
rail (300 mV) at low distortion (0.05% THD+Noise).
There are several package options for each part.
Standard SOIC versions of both parts make
upgrading existing designs easy. LM7322LM7322Q
are offered in a space saving 8-Pin VSSOP package.
The LM7321/LM7321Q are offered in small SOT-23
package, which makes it easy to place this part close
to sensors for better circuit performance.
±15V.
•
LM7321Q/LM7322Q are Automotive Grade
Products that are AEC-Q100 Grade 1 Qualified.
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
Driving MOSFETs and Power Transistors
Capacitive Proximity Sensors
Driving Analog Optocouplers
High Side Sensing
Below Ground Current Sensing
Photodiode Biasing
Driving Varactor Diodes in PLLs
Wide Voltage Range Power supplies
Automotive
International Power Supplies
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated