February 1995
LM710
Voltage Comparator
ers in saturating comparator applications. In fact, the low
stray and wiring capacitances that can be realized with
monolithic construction make the device difficult to duplicate
with discrete components operating at equivalent power lev-
els.
General Description
The LM710 series are high-speed voltage comparators in-
tended for use as an accurate, low-level digital level sensor
or as a replacement for operational amplifiers in comparator
applications where speed is of prime importance. The circuit
has a differential input and a single-ended output, with satu-
rated output levels compatible with practically all types of in-
tegrated logic.
The LM710 series are useful as pulse height discriminators,
voltage comparators in high-speed A/D converters or go,
no-go detectors in automatic test equipment. They also have
applications in digital systems as an adjustable-threshold
line receiver or an interface between logic types. In addition,
the low cost of the units suggests them for applications re-
placing relatively simple discrete component circuitry.
The device is built on a single silicon chip which insures low
offset and thermal drift. The use of a minimum number of
stages along with minority-carrier lifetime control (gold dop-
ing) makes the circuit much faster than operational amplifi-
Schematic and Connection Diagrams
Ceramic Flatpak Package
DS010410-9
* Also available per JM38510/10301
*
Order Number LM710AMW/883
See NS Package Number W10A
DS010410-1
© 1997 National Semiconductor Corporation
DS010410
www.national.com
1
PrintDate=1997/05/16 PrintTime=10:46:07 7730 ds010410 Rev. No. 1 Proof
1