LM6171
www.ti.com
SNOS745C –MAY 1998–REVISED MARCH 2013
LM6171 High Speed Low Power Low Distortion Voltage Feedback Amplifier
Check for Samples: LM6171
1
FEATURES
DESCRIPTION
The LM6171 is a high speed unity-gain stable voltage
feedback amplifier. It offers a high slew rate of
3600V/μs and a unity-gain bandwidth of 100 MHz
while consuming only 2.5 mA of supply current. The
LM6171 has very impressive AC and DC
performance which is a great benefit for high speed
signal processing and video applications.
23
•
(Typical Unless Otherwise Noted)
Easy-To-Use Voltage Feedback Topology
Very High Slew Rate: 3600V/μs
Wide Unity-Gain-Bandwidth Product: 100 MHz
−3dB Frequency @ AV = +2: 62 MHz
Low Supply Current: 2.5 mA
•
•
•
•
•
•
•
•
The ±15V power supplies allow for large signal
swings and give greater dynamic range and signal-to-
noise ratio. The LM6171 has high output current
drive, low SFDR and THD, ideal for ADC/DAC
systems. The LM6171 is specified for ±5V operation
for portable applications.
High CMRR: 110 dB
High Open Loop Gain: 90 dB
Specified for ±15V and ±5V Operation
APPLICATIONS
The LM6171 is built on TI's advanced VIP III
(Vertically Integrated PNP) complementary bipolar
process.
•
•
•
•
•
•
•
•
•
Multimedia Broadcast Systems
Line Drivers, Switchers
Video Amplifiers
NTSC, PAL® and SECAM Systems
ADC/DAC Buffers
HDTV Amplifiers
Pulse Amplifiers and Peak Detectors
Instrumentation Amplifier
Active Filters
CONNECTION DIAGRAM
Figure 1. Top View
8-Pin SOIC/PDIP
See Package Number D (SOIC) or
See Package Number P (PDIP)
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
PAL is a registered trademark of and used under lisence from Advanced Micro Devices, Inc..
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated