Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
LM5150-Q1
SNVSAP6B –SEPTEMBER 2017–REVISED JUNE 2020
LM5150-Q1 Wide VIN Automotive Low IQ Boost Controller
1 Features
2 Applications
1
•
AEC-Q100 qualified:
•
•
•
Automotive start-stop system
Automotive emergency call system
Battery-powered boost converters
–
Device temperature grade 1: –40°C to +125°C
ambient operating temperature range
–
–
Device HBM ESD classification level 2
Device CDM ESD classification level C4B
3 Description
The LM5150-Q1 device is a wide input range
automatic boost controller. The device is suitable for
use as a pre-boost converter which maintains the
•
•
Functional Safety-Capable
–
Documentation available to aid functional
safety system design
output voltage from
a
vehicle battery during
automotive cranking or from a back-up battery during
the loss of vehicle battery.
Wide VIN input range from 1.5 V to 42 V when
VOUT ≥ 5 V (65-V absolute maximum)
•
•
•
Low shutdown current (IQ ≤ 5 µA)
Low standby current (IQ ≤ 15 µA)
The LM5150-Q1 switching frequency is programmed
by a resistor from 220 kHz to 2.3 MHz. Fast switching
(≥ 2.2 MHz) minimizes AM band interference and
allows for a small solution size and fast transient
response.
Four programmable output voltage options and
two selectable configurations
–
–
6.8 V, 7.5 V, 8.5 V, or 10.5 V
The LM5150-Q1 operates in low IQ standby mode
when the input or output voltage is above the preset
standby thresholds and automatically wakes up when
the output voltage drops below the preset wake-up
threshold.
Start-stop or E-call configurations
•
Adjustable switching frequency from 220 kHz to
2.3 MHz
•
•
•
•
•
•
•
•
Automatic wake-up and standby mode transition
Optional clock synchronization
Boost status indicator
The device transients in and out of the low IQ standby
mode to extend battery life at light load. A single
resistor programs the target output regulation voltage
as well as the configuration. Additional features
include low shutdown current, boost status indicator,
adjustable cycle-by-cycle current limit, and thermal
shutdown.
1.5-A peak MOSFET gate driver
Adjustable cycle-by-cycle current limit
Thermal shutdown
16-Pin WQFN with wettable flanks
Device Information(1)
Create a custom design using the LM5150-Q1
with the WEBENCH® Power Designer
PART NUMBER
PACKAGE
BODY SIZE (NOM)
LM5150-Q1
WQFN (16)
4.00 mm × 4.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application Circuit
Efficiency (VLOAD = 6.8 V, FSW = 440 kHz)
VSUPPLY
VLOAD
100
95
90
85
LO
CS AGND
PGND VOUT
EN
VIN
STATUS
SYNC
RT
80
LM5150
COMP
VSUPPLY=5.5V
VSET
VCC
AVCC
VSUPPLY=4.5V
VSUPPLY=3.5V
VSUPPLY=2.5V
75
70
0
0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
Load Current (A)
3
D008
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.