LM5122/LM5122-Q1
www.ti.com
SNVS954C –APRIL 2013–REVISED MAY 2013
Wide Input Synchronous Boost Controller with Multiple Phase Capability
Check for Samples: LM5122/LM5122-Q1
1
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Available in AEC-Q100 (LM5122-Q1)
Maximum Input Voltage : 65 V
•
•
•
•
12 V, 24 V, and 48 V Power Systems
Automotive Start-Stop
Min Input Voltage : 3.0 V (4.5 V for startup)
Output Voltage up to 100 V
Audio Power Supply
High Current Boost Power Supply
Bypass (VOUT = VIN) Operation
DESCRIPTION
The LM5122 is a multiphase capable synchronous
boost
synchronous boost regulator applications. The control
method is based upon peak current mode control.
Current mode control provides inherent line feed-
forward, cycle-by-cycle current limiting and ease of
loop compensation.
1.2 V Reference with ±1.0% Accuracy
Free-Run/Synchronizable Switching to 1 MHz
Peak Current Mode Control
controller
intended
for
high-efficiency
Robust 3 A Integrated Gate Drivers
Adaptive Dead-Time Control
Optional Diode Emulation Mode
Programmable Cycle-by-Cycle Current Limit
Hiccup Mode Overload Protection
Programmable Line UVLO
The switching frequency is programmable up to 1
MHz. Higher efficiency is achieved by two robust N-
channel MOSFET gate drivers with adaptive dead-
time control. A user-selectable diode emulation mode
also enables discontinuous mode operation for
improved efficiency at light load conditions.
Programmable Soft-Start
Thermal Shutdown Protection
Low Shutdown Quiescent Current: 9 μA
Programmable Slope Compensation
An internal charge pump allows 100% duty cycle for
high-side synchronous switch (Bypass operation). A
180º phase shifted clock output enables easy multi-
phase interleaved configuration. Additional features
include thermal shutdown, frequency synchronization,
hiccup mode current limit and adjustable line
undervoltage lockout.
Programmable Skip Cycle Mode Reduces
Standby Power
•
•
•
•
Allows External VCC Supply
Inductor DCR Current Sensing Capability
Multiphase Capability
Thermally Enhanced 20-Pin HTSSOP
SIMPLIFIED APPLICATION DIAGRAM
V
IN
V
OUT
+
VCC BST
CSN
SW
LO
HO
COMP
FB
CSP
VIN
UVLO
RES
SLOPE
SYNCIN/RT
SYNCOUT
SS
MODE
PGND
AGND
OPT
LM5122
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated