LM5116WG
www.ti.com
SNVS599D –OCTOBER 2008–REVISED FEBRUARY 2013
LM5116WG Wide Range Synchronous Buck Controller
Check for Samples: LM5116WG
1
FEATURES
DESCRIPTION
The LM5116WG is a synchronous buck controller
intended for step-down regulator applications from a
high voltage or widely varying input supply. The
control method is based upon current mode control
utilizing an emulated current ramp. Current mode
control provides inherent line feed-forward, cycle by
cycle current limiting and ease of loop compensation.
The use of an emulated control ramp reduces noise
sensitivity of the pulse-width modulation circuit,
allowing reliable control of very small duty cycles
necessary in high input voltage applications. The
operating frequency is programmable from 50 kHz to
1 MHz. The LM5116WG drives external high-side and
low-side NMOS power switches with adaptive dead-
time control. A user-selectable diode emulation mode
enables discontinuous mode operation for improved
efficiency at light load conditions. A low quiescent
current shutdown disables the controller and
consumes less than 10 µA of total input current.
2
•
Hermetic Package for Harsh Operating
Environments
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Emulated Peak Current Mode
Wide Operating Range up to 100V
Low IQ Shutdown (< 10 µA)
Drives Standard or Logic Level MOSFETs
Robust 3.5A Peak Gate Drive
Free-Run or Synchronous Operation to 1 MHz
Optional Diode Emulation Mode
Programmable Output from 1.215V to 80V
Precision 1.5% Voltage Reference
Programmable Current Limit
Programmable Soft-Start
Programmable Line Under-Voltage Lockout
Automatic Switch to External Bias Supply
CPGA-20 with No Thermal Shutdown
Additional features include
a high voltage bias
regulator, automatic switch-over to external bias for
improved efficiency, frequency synchronization, cycle
by cycle current limit and adjustable line under-
voltage lockout. The device is available in a CPGA-20
high temperature ceramic package with the thermal
shutdown feature disabled.
Typical Application
VIN
VCC
VIN
LM5116WG
C
VCC
R
R
C
UV2
IN
HB
UVLO
V
IN
UV1
C
HB
HO
SW
L
EN
VOUT
C
SYNC
RT/SYNC
C
OUT
LO
CS
R
T
R
S
COMP
FB
CSG
C
COMP
DEMB
C
HF
R
COMP
VOUT
VCCX
R
R
FB2
SS
RAMP
C
AGND PGND
RAMP
C
SS
FB1
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated