LM5015
www.ti.com
SNVS538C –NOVEMBER 2007–REVISED APRIL 2013
LM5015 High Voltage Monolithic Two-Switch Forward DC-DC Regulator
Check for Samples: LM5015
1
FEATURES
DESCRIPTION
The LM5015 high voltage switch mode regulator
features all the functions necessary to implement
efficient high voltage Two-Switch Forward and Two-
Switch Flyback regulators, using a minimum of
external components. This easy to use regulator
integrates high side and low side 75 Volt N-Channel
MOSFETs with a minimum 1 Amp peak current limit.
The voltage across the MOSFETs employed in the
two-switch topology is clamped to the input voltage,
allowing the input voltage range to approach the
rating of the MOSFETs. The regulator control method
is based on current mode control providing inherent
ease of loop compensation and line feed-forward for
superior rejection of input transients.
2
•
•
•
•
•
•
Dual Integrated 75V N-Channel MOSFETs
Ultra-Wide Input Voltage Range: 4.25V to 75V
Integrated High Voltage Bias Regulator
Adjustable Output Voltage
1.5% Feedback Reference Accuracy
Current Mode Control with Selectable
Compensation
•
•
•
•
•
•
•
•
Wide Bandwidth Error Amplifier
Integrated Current Sensing and Limiting
50% Maximum Duty Cycle Limit
Single Resistor Oscillator Programming
Oscillator Synchronization Capability
Programmable Soft-Start
The operating frequency is set with a single resistor
and is programmable up to 750 kHz. The oscillator
can also be synchronized to an external clock.
Additional protection features include cycle-by-cycle
current limiting, thermal shutdown, under-voltage
lockout and remote shutdown capability. The device
is available in the HTSSOP-14EP package featuring
an exposed die attach pad to enhance thermal
dissipation.
Enable / Under-Voltage Lockout (UVLO) Pin
Thermal Shutdown
PACKAGE
•
HTSSOP-14EP (Exposed Pad)
Typical Application Schematic
Input
(4.25V - 75V)
Isolated
Output
VIN
EN
PVIN
HO
LM5015
BST
VCC
LO
RT
ISOLATED
FEEDBACK
COMP
SS
FB
GND
PGND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated