LM5000
www.ti.com
SNVS176D –MAY 2004–REVISED MARCH 2007
LM5000 High Voltage Switch Mode Regulator
Check for Samples: LM5000
1
FEATURES
DESCRIPTION
The LM5000 is
a monolithic integrated circuit
2
•
•
•
80V Internal Switch
specifically designed and optimized for flyback, boost
or forward power converter applications. The internal
power switch is rated for a maximum of 80V, with a
current limit set to 2A. Protecting the power switch
are current limit and thermal shutdown circuits. The
current mode control scheme provides excellent
rejection of line transients and cycle-by-cycle current
limiting. An external compensation pin and the built-in
slope compensation allow the user to optimize the
frequency compensation. Other distinctive features
include softstart to reduce stresses during start-up
and an external shutdown pin for remote ON/OFF
control. There are two operating frequency ranges
available. The LM5000-3 is pin selectable for either
300kHz (FS Grounded) or 700kHz (FS Open). The
LM5000-6 is pin selectable for either 600kHz (FS
Grounded) or 1.3MHz (FS Open). The device is
available in a low profile 16-lead TSSOP package or
a thermally enhanced 16-lead WSON package.
Operating Input Voltage Range of 3.1V to 40V
Pin Selectable Operating Frequency
–
–
300kHz/700kHz (-3)
600kHz/1.3MHz (-6)
•
•
•
•
•
•
•
•
Adjustable Output Voltage
External Compensation
Input Undervoltage Lockout
Softstart
Current Limit
Over Temperature Protection
External Shutdown
Small 16-Lead TSSOP or 16-Lead WSON
Package
APPLICATIONS
•
•
•
•
•
Flyback Regulator
Forward Regulator
Boost Regulator
DSL Modems
Distributed Power Converters
Typical Application Circuit
Figure 1. LM5000 Flyback Converter
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2007, Texas Instruments Incorporated