LM4930
www.ti.com
SNAS212C –JULY 2003–REVISED MAY 2013
LM4930 Boomer™ Audio Power Amplifier Series Audio Subsystem with Stereo
Headphone & Mono Speaker Amplifiers
Check for Samples: LM4930
1
FEATURES
DESCRIPTION
The LM4930 is an integrated audio subsystem that
supports voice and digital audio functions. The
LM4930 includes a high quality I2S input stereo DAC,
a voice band codec, a stereo headphone amplifier
and a high-power mono speaker amplifier. It is
primarily designed for demanding applications in
mobile phones and other portable devices.
23
•
16-bit Resolution 48kHz Stereo DAC
16-bit Resolution 8kHz Voice Codec
I2S Digital Audio Data Serial Interface
Two-wire Serial Control Interface
•
•
•
•
•
•
•
PCM Voice Audio Data Serial Interface
25mW/channel Stereo Headphone Amplifier
330mW Mono 8Ω Amplifier (at AVDD = 3.0V)
The LM4930 features an I2S serial interface for full
range audio,
a 16-bit PCM bi-directional serial
32-step Volume Control for Audio Output
Amplifiers
interface for the voice band codec and an two-wire
interface for control. The full range music path
features an SNR of 86dB with a 16-bit 48kHz input.
The stereo DAC can also be used while the voice
codec is in use. The headphone amplifier delivers
25mWRMS to a 32Ω single-ended stereo load with
less than 0.5% distortion (THD+N) when AVDD = 3V.
The mono speaker amplifier delivers up to 330mW
into an 8Ω load with less than 1% distortion when
AVDD = 3V.
•
No Snubber Networks or Bootstrap Capacitors
are Required by the Headphone or Hands-free
Amplifiers
•
•
•
Digital Sidetone Generation with Adjustable
Attenuation
Gain Controllable Headphone Amp, Mono BTL
Amp, Mic Preamp
The LM4930 employs advanced techniques to reduce
power consumption, to reduce controller overhead
and to eliminate click and pop. Boomer audio power
amplifiers were designed specifically to provide high
quality output power with a minimal amount of
external components. It is, therefore, ideally suited for
mobile phone and other low voltage applications
where minimal power consumption is a primary
requirement.
Available in the 36–bump DSBGA and 44–lead
WQFN Packages
APPLICATIONS
•
•
•
Mobile Phones
Mobile/low Power Audio Appliances
PDAs
KEY SPECIFICATIONS
•
•
•
•
PLS OUT at AVDD = 5.0V, 8Ω 1% THD+N 1W
(typ)
PLS OUT at AVDD = 3.0V, 8Ω 1% THD+N
330mW (typ)
PH/P OUT at AVDD = 3.0V, 32Ω 0.5% THD+N
25mW (typ)
Supply Voltage Range
–
–
DVDD(1) 2.6V to 4.5V
AVDD(1) 2.6V to 5.5V
•
•
Total Shutdown Current 2μA (typ)
PSRR at 217Hz, AVDD = 3V 50dB (typ)
(1) Best operation is achieved by maintaining 3.0V ≤ AVDD ≤ 5.0
and 3.0V ≤ DVDD ≤ 3.6V. AVDD must be equal to or greater
than DVDD. for proper operation.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Boomer is a trademark of Texas Instruments Incorporated.
2
3
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2003–2013, Texas Instruments Incorporated