LM45
www.ti.com
SNIS117C –AUGUST 1999–REVISED FEBRUARY 2013
LM45 SOT-23 Precision Centigrade Temperature Sensors
Check for Samples: LM45
1
FEATURES
DESCRIPTION
The LM45 series are precision integrated-circuit
temperature sensors, whose output voltage is linearly
proportional to the Celsius (Centigrade) temperature.
The LM45 does not require any external calibration or
trimming to provide accuracies of ±2°C at room
temperature and ±3°C over a full −20 to +100°C
temperature range. Low cost is assured by trimming
and calibration at the wafer level. The LM45's low
output impedance, linear output, and precise inherent
calibration make interfacing to readout or control
circuitry especially easy. It can be used with a single
power supply, or with plus and minus supplies. As it
draws only 120 μA from its supply, it has very low
self-heating, less than 0.2°C in still air. The LM45 is
rated to operate over a −20° to +100°C temperature
range.
2
•
•
•
•
•
•
•
•
•
•
•
Calibrated Directly in ° Celsius (Centigrade)
Linear + 10.0 mV/°C Scale Factor
±3°C Accuracy Guaranteed
Rated for Full −20° to +100°C Range
Suitable for Remote Applications
Low Cost Due to Wafer-Llevel Trimming
Operates from 4.0V to 10V
Less than 120 μA Current Drain
Low Self-Heating, 0.20°C in Still Air
Nonlinearity Only ±0.8°C Max Over Temp
Low Impedance Output, 20Ω for 1 mA Load
APPLICATIONS
•
•
•
•
•
•
•
•
•
Battery Management
FAX Machines
Printers
Connection Diagram
Portable Medical Instruments
HVAC
Power Supply Modules
Disk Drives
Figure 1. SOT-23
Top View
Package Number DBZ0003A
Computers
Automotive
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated