ꢀꢁ ꢂ ꢃꢄ ꢀ
ꢂ ꢅꢆ ꢇꢈꢁ ꢉꢊꢋ ꢀ ꢋꢌꢍ ꢎꢏ ꢆꢋꢐꢀ ꢇ ꢈꢇꢑ ꢎ ꢀꢋꢆꢒ ꢈ
SLCS144 − JULY 2004
D OR PW PACKAGE
(TOP VIEW)
D
Output Voltage Range Adjustable From
1.2 V to 32 V When Used With an External
Resistor Divider
INPUT
NC
1
2
3
4
8
7
6
5
D
D
Output Current Capability of 100 mA
OUTPUT
OUTPUT
ADJUSTMENT
OUTPUT
OUTPUT
NC
Input Regulation Typically 0.01% Per
Input-Voltage Change
D
D
D
Output Regulation Typically 0.5%
Ripple Rejection Typically 80 dB
NC − No internal connection
OUTPUT terminals are all internally connected.
For Higher Output Current Requirements,
See LM317M (500 mA) and LM317 (1.5 A)
LP PACKAGE
(TOP VIEW)
description/ordering information
INPUT
The LM317L is an adjustable three-terminal
positive-voltage regulator capable of supplying
100 mA over an output-voltage range of 1.2 V to
32 V. It is exceptionally easy to use and requires
only two external resistors to set the output
voltage.
OUTPUT
ADJUSTMENT
In addition to higher performance than fixed
regulators, this regulator offers full overload
protection, available only in integrated circuits. Included on the chip are current-limiting and thermal-overload
protection. All overload-protection circuitry remains fully functional, even when ADJUSTMENT is disconnected.
Normally, no capacitors are needed unless the device is situated far from the input filter capacitors, in which
case an input bypass is needed. An optional output capacitor can be added to improve transient response.
ADJUSTMENT can be bypassed to achieve very high ripple rejection, which is difficult to achieve with standard
three-terminal regulators.
In addition to replacing fixed regulators, the LM317L regulator is useful in a wide variety of other applications.
Since the regulator is floating and sees only the input-to-output differential voltage, supplies of several hundred
volts can be regulated as long as the maximum input-to-output differential is not exceeded. Its primary
application is that of a programmable output regulator, but by connecting a fixed resistor between
ADJUSTMENT and OUTPUT, this device can be used as a precision current regulator. Supplies with electronic
shutdown can be achieved by clamping ADJUSTMENT to ground, programming the output to 1.2 V, where most
loads draw little current.
The LM317LC is characterized for operation over the virtual junction temperature range of 0°C to 125°C.
ORDERING INFORMATION
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
†
T
J
PACKAGE
Tube of 75
LM317LCD
SOIC (D)
L317LC
L317LC
L317LC
Reel of 2500
Bulk of 1000
Reel of 2000
Tube of 150
Reel of 2000
LM317LCDR
LM317LCLP
LM317LCLPR
LM317LCPW
LM317LCPWR
0°C to 125°C
TO-226 / TO-92 (LP)
TSSOP (PW)
†
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design
guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
ꢓ
ꢓ
ꢈ
ꢒ
ꢤ
ꢌ
ꢟ
ꢎ
ꢔ
ꢝ
ꢆ
ꢞ
ꢉ
ꢘ
ꢒ
ꢖ
ꢊ
ꢗ
ꢌ
ꢋ
ꢆ
ꢋ
ꢕ
ꢖ
ꢠ
ꢗ
ꢘ
ꢞ
ꢙ
ꢚ
ꢛ
ꢛ
ꢜ
ꢜ
ꢕ
ꢕ
ꢘ
ꢘ
ꢖ
ꢖ
ꢕ
ꢝ
ꢝ
ꢡ
ꢞ
ꢟ
ꢙ
ꢙ
ꢠ
ꢠ
ꢖ
ꢜ
ꢛ
ꢚ
ꢝ
ꢝ
ꢘ
ꢗ
ꢡ
ꢆꢠ
ꢟ
ꢢ
ꢝ
ꢣ
ꢕ
ꢞ
ꢛ
ꢝ
ꢜ
ꢕ
ꢜ
ꢘ
ꢙ
ꢖ
ꢟ
ꢤ
ꢛ
ꢖ
ꢜ
ꢜ
ꢠ
ꢝ
ꢥ
Copyright 2004, Texas Instruments Incorporated
ꢙ
ꢘ
ꢞ
ꢜ
ꢘ
ꢙ
ꢚ
ꢜ
ꢘ
ꢝ
ꢡ
ꢕ
ꢗ
ꢕ
ꢞ
ꢠ
ꢙ
ꢜ
ꢦ
ꢜ
ꢠ
ꢙ
ꢘ
ꢗ
ꢧ
ꢛ
ꢉ
ꢖ
ꢚ
ꢠ
ꢝ
ꢜ
ꢛ
ꢖ
ꢤ
ꢛ
ꢙ
ꢤ
ꢨ
ꢛ
ꢜ ꢠ ꢝ ꢜꢕ ꢖꢪ ꢘꢗ ꢛ ꢣꢣ ꢡꢛ ꢙ ꢛ ꢚ ꢠ ꢜ ꢠ ꢙ ꢝ ꢥ
ꢙ
ꢙ
ꢛ
ꢖ
ꢜ
ꢩ
ꢥ
ꢓ
ꢙ
ꢘ
ꢤ
ꢟ
ꢞ
ꢜ
ꢕ
ꢘ
ꢖ
ꢡ
ꢙ
ꢘ
ꢞ
ꢠ
ꢝ
ꢝ
ꢕ
ꢖ
ꢪ
ꢤ
ꢘ
ꢠ
ꢝ
ꢖ
ꢘ
ꢜ
ꢖ
ꢠ
ꢞ
ꢠ
ꢝ
ꢝ
ꢛ
ꢙ
ꢕ
ꢣ
ꢩ
ꢕ
ꢖ
ꢞ
ꢣ
ꢟ
ꢤ
ꢠ
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265