February 2005
LM2902EP
Low Power Quad Operational Amplifiers
General Description
Advantages
n Eliminates need for dual supplies
The LM2902 consists of four independent, high gain, inter-
nally frequency compensated operational amplifiers which
were designed specifically to operate from a single power
supply over a wide range of voltages. Operation from split
power supplies is also possible and the low power supply
current drain is independent of the magnitude of the power
supply voltage.
n Four internally compensated op amps in a single
package
n Allows directly sensing near GND and VOUT also goes
to GND
n Compatible with all forms of logic
n Power drain suitable for battery operation
Application areas include transducer amplifiers, DC gain
blocks and all the conventional op amp circuits which now
can be more easily implemented in single power supply
systems. For example, the LM2902 can be directly operated
off of the standard +5V power supply voltage which is used
in digital systems and will easily provide the required inter-
face electronics without requiring the additional 15V power
supplies.
Features
n Internally frequency compensated for unity gain
n Large DC voltage gain 100 dB
n Wide bandwidth (unity gain) 1 MHz
(temperature compensated)
n Wide power supply range:
Single supply 3V to 26V
ENHANCED PLASTIC
or dual supplies
1.5V to 13V
•
•
•
•
•
•
Extended Temperature Performance of −40˚C to +85˚C
Baseline Control - Single Fab & Assembly Site
Process Change Notification (PCN)
n Very low supply current drain (700 µA)—essentially
independent of supply voltage
n Low input biasing current 45 nA
(temperature compensated)
n Low input offset voltage 2 mV
and offset current: 5 nA
n Input common-mode voltage range includes ground
n Differential input voltage range equal to the power
supply voltage
n Large output voltage swing 0V to V+ − 1.5V
Qualification & Reliability Data
Solder (PbSn) Lead Finish is standard
Enhanced Diminishing Manufacturing Sources (DMS)
Support
Unique Characteristics
n In the linear mode the input common-mode voltage
range includes ground and the output voltage can also
swing to ground, even though operated from only a
single power supply voltage
Applications
n Selected Military Applications
n Selected Avionics Applications
n The unity gain cross frequency is temperature
compensated
n The input bias current is also temperature compensated
Ordering Information
PART NUMBER
LM2902MEP
(Notes 1, 2)
VID PART NUMBER
V62/04744-01
TBD
NS PACKAGE NUMBER (Note 3)
M14A
TBD
Note 1: For the following (Enhanced Plastic) version, check for availability: LM2902MXEP, LM2902MTEP, LM2902MTXEP, LM2902NEP. Parts listed
with an "X" are provided in Tape & Reel and parts without an "X" are in Rails.
Note 2: FOR ADDITIONAL ORDERING AND PRODUCT INFORMATION, PLEASE VISIT THE ENHANCED PLASTIC WEB SITE AT: www.national.com/
mil
Note 3: Refer to package details under Physical Dimensions
© 2005 National Semiconductor Corporation
DS201140
www.national.com