LM26001B
www.ti.com
SNVS491B –MAY 2007–REVISED APRIL 2013
LM26001B 1.5A Switching Regulator with High Efficiency Sleep Mode
Check for Samples: LM26001B
1
FEATURES
DESCRIPTION
The LM26001B is a switching regulator designed for
the high efficiency requirements of applications with
stand-by modes. The device features a low-current
sleep mode to maintain efficiency under light-load
conditions and current-mode control for accurate
regulation over a wide input voltage range. Quiescent
current is reduced to 10 µA typically in shutdown
mode and less than 40 µA in sleep mode. Forced
PWM mode is also available to disable sleep mode.
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
High Efficiency Sleep Mode
40 µA Typical Iq in Sleep Mode
10 µA Typical Iq in Shutdown Mode
3.0V Minimum Input Voltage
4.0V to 18V Continuous Input Range
2.0% Reference Accuracy
Cycle-by-Cycle Current Limit
Adjustable Frequency (150 kHz to 500 kHz)
Synchronizable to an External Clock
Power Good Flag
The LM26001B can deliver up to 1.5A of continuous
load current with a fixed current limit, through the
internal N-channel switch. The part has a wide input
voltage range of 4.0V to 18V and can operate with
input voltages as low as 3V during line transients.
Forced PWM Function
Adjustable Soft-Start
Operating frequency is adjustable from 150 kHz to
HTSSOP-16 Exposed Pad Package
Thermal Shut Down
500 kHz with
a single resistor and can be
synchronized to an external clock.
Other features include Power good, adjustable soft-
start, enable pin, input under-voltage protection, and
an internal bootstrap diode for reduced component
count.
APPLICATIONS
•
•
•
•
•
Automotive Telematics
Navigation Systems
In-Dash Instrumentation
Battery Powered Applications
Stand-by Power for Home Gateways/Set-Top
Boxes
Typical Application Circuit
VIN
1
2
12
VIN
VIN
VBIAS
VOUT
C6
16
15
SW
C1
L
3
4
PGOOD
EN
+
SW
C4
D1
R1
14
7
R4
BOOT
EN
LM26001B
11
SYNC
SS
FB
VDD
5
9
6
13
8
COMP
SYNC
R6
FREQ
FPWM
VDD
GND
C8
R2
C5
10
EP
17
C3
R3
R5
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated