Order this document by LM2575/D
EASY SWITCHER
1.0 A STEP–DOWN
VOLTAGE REGULATOR
The LM2575 series of regulators are monolithic integrated circuits ideally
suited for easy and convenient design of a step–down switching regulator
(buck converter). All circuits of this series are capable of driving a 1.0 A load
with excellent line and load regulation. These devices are available in fixed
output voltages of 3.3 V, 5.0 V, 12 V, 15 V, and an adjustable output version.
These regulators were designed to minimize the number of external
components to simplify the power supply design. Standard series of
inductors optimised for use with the LM2575 are offered by several different
inductor manufacturers.
SEMICONDUCTOR
TECHNICAL DATA
Since the LM2575 converter is a switch–mode power supply, its efficiency
is significantly higher in comparison with popular three–terminal linear
regulators, especially with higher input voltages. In many cases, the power
dissipated by the LM2575 regulator is so low, that no heatsink is required or
its size could be reduced dramatically.
The LM2575 features include a guaranteed ±4% tolerance on output
voltage within specified input voltages and output load conditions, and ±10%
on the oscillator frequency (±2% over 0°C to 125°C). External shutdown is
included, featuring 80 µA typical standby current. The output switch includes
cycle–by–cycle current limiting, as well as thermal shutdown for full
protection under fault conditions.
T SUFFIX
PLASTIC PACKAGE
CASE 314D
1
5
Pin 1. V
in
2. Output
3. Ground
4. Feedback
5. ON/OFF
Features
TV SUFFIX
PLASTIC PACKAGE
1
• 3.3 V, 5.0 V, 12 V, 15 V, and Adjustable Output Versions
CASE 314B
• Adjustable Version Output Voltage Range of 1.23 V to 37 V ±4%
5
Maximum Over Line and Load Conditions
Heatsink surface
connected to Pin 3.
• Guaranteed 1.0 A Output Current
• Wide Input Voltage Range: 4.75 V to 40 V
• Requires Only 4 External Components
• 52 kHz Fixed Frequency Internal Oscillator
• TTL Shutdown Capability, Low Power Standby Mode
• High Efficiency
D2T SUFFIX
PLASTIC PACKAGE
1
CASE 936A
2
5
(D PAK)
• Uses Readily Available Standard Inductors
• Thermal Shutdown and Current Limit Protection
Heatsink surface (shown as terminal 6 in case outline
drawing) is connected to Pin 3.
Applications
• Simple and High–Efficiency Step–Down (Buck) Regulators
• Efficient Pre–Regulator for Linear Regulators
• On–Card Switching Regulators
• Positive to Negative Converters (Buck–Boost)
• Negative Step–Up Converters
DEVICE TYPE/NOMINAL OUTPUT VOLTAGE
LM2575–3.3
LM2575–5
3.3 V
5.0 V
LM2575–12
LM2575–15
LM2575–Adj
12 V
15 V
1.23 V to 37 V
• Power Supply for Battery Chargers
ORDERING INFORMATION
Operating
Temperature Range
Device
Package
LM2575T–**
Straight Lead
Vertical Mount
Surface Mount
LM2575TV–** T = –40° to +125°C
J
LM2575D2T–**
** = Voltage Option, ie. 3.3, 5.0, 12, 15 V and
** =\Adjustable Output.
Motorola, Inc. 1999
Rev 2, 07/1999
1
MOTOROLA ANALOG IC DEVICE DATA