LM25069
www.ti.com
SNVS607E –FEBRUARY 2011–REVISED MARCH 2013
LM25069 Positive Low Voltage Power Limiting Hot Swap Controller
Check for Samples: LM25069
1
FEATURES
APPLICATIONS
2
•
•
Operating R ange: +2.9V to +17V
•
•
•
Server Backplane Systems
In-rush Current Limit for Safe Board Insertion
into Live Power Sources
Base Station Power Distribution Systems
Solid State Circuit Breaker
•
Programmable Maximum Power Dissipation in
the External Pass Device
PACKAGE
•
•
Adjustable Current Limit
•
VSSOP-10
Circuit Breaker Function for Severe Over-
Current Events
DESCRIPTION
The LM25069 positive hot swap controller provides
intelligent control of the power supply voltage to the
load during insertion and removal of circuit cards from
a live system backplane or other "hot" power sources.
The LM25069 provides in-rush current control to limit
system voltage droop and transients. The current limit
and power dissipation in the external series pass N-
Channel MOSFET are programmable, ensuring
operation within the Safe Operating Area (SOA). The
POWER GOOD output indicates when the output
voltage is within 1.3V of the input voltage. The input
under-voltage and over-voltage lockout levels and
hysteresis are programmable, as well as the initial
insertion delay time and fault detection time. The
LM25069-1 latches off after a fault detection, while
the LM25069-2 automatically restarts at a fixed duty
cycle. The LM25069 is available in a 10 pin VSSOP
package.
•
•
•
•
Internal High Side Charge Pump and Gate
Driver for External N-channel MOSFET
Adjustable Under-Voltage Lockout (UVLO) and
Hysteresis
Adjustable Over-Voltage Lockout (OVLO) and
Hysteresis
Initial Insertion Timer Allows Ringing and
Transients to Subside After System
Connection
•
Programmable Fault Timer Avoids Nuisance
Trips
•
•
Active High Open Drain POWER GOOD Output
Available in Latched Fault and Automatic
Restart Versions
Typical Application
V
V
OUT
SYS
VIN
SENSE GATE
OUT
UVLO/EN
LM25069
Power
Good
PGD
PWR
OVLO
TIMER
GND
Figure 1. Positive Power Supply Control
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2013, Texas Instruments Incorporated