LM20323
www.ti.com
SNVS557C –MAY 2008–REVISED APRIL 2013
LM20323 36V, 3A 500 kHz Synchronous Buck Regulator
Check for Samples: LM20323
1
FEATURES
APPLICATIONS
2
•
•
•
•
4.5V to 36V Input Voltage Range
•
•
•
Simple to Design, high Efficiency Point of
Load Regulation from a 4.5V to 36V Bus
3A Output Current, 5.2A Peak Current
130 mΩ/110 mΩ Integrated Power MOSFETs
High Performance DSPs, FPGAs, ASICs and
Microprocessors
93% Peak Efficiency with Synchronous
Rectification
Communications Infrastructure, Automotive
DESCRIPTION
•
•
1.5% Feedback Voltage Accuracy
The LM20323 is a full featured 500kHz synchronous
buck regulator capable of delivering up to 3A of load
current. The current mode control loop is externally
compensated with only two components, offering both
high performance and ease of use. The device is
optimized to work over the input voltage range of
4.5V to 36V making it well suited for high voltage
systems.
Current Mode Control, Selectable
Compensation
•
•
•
•
Fixed 500 kHz Switching Frequency
Adjustable Output Voltage Down to 0.8V
Compatible with Pre-biased Loads
Programmable Soft-start with External
Capacitor
The device features internal Over Voltage Protection
(OVP) and Over Current Protection (OCP) circuits for
increased system reliability. A precision Enable pin
and integrated UVLO allows the turn-on of the device
to be tightly controlled and sequenced. Startup inrush
currents are limited by both an internally fixed and
externally adjustable soft-start circuit. Fault detection
and supply sequencing are possible with the
integrated power good (PGOOD) circuit.
•
•
•
Precision Enable Pin with Hysteresis
Integrated OVP, UVLO, PGOOD
Internally Protected with Peak Current Limit,
Thermal Shutdown and Restart
•
Accurate Current Limit Minimizes Inductor
Size
•
•
Non-linear Current Mode Slope Compensation
20-Pin HTSSOP Exposed Pad Package
Simplified Application Circuit
LM20323
BOOT
C
BOOT
L
V
SW
V
IN
OUT
VIN
D1
(Optional)
C
IN
R
FB1
C
OUT
EN
FB
R
FB2
COMP
PGOOD
SS/TRK
AGND
VCC
GND
R
C
C1
C
VCC
C1
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated