LM139-SP, LM139A-SP
www.ti.com
SCLS720C –NOVEMBER 2010–REVISED MARCH 2011
QUAD DIFFERENTIAL COMPARATOR
Check for Samples: LM139-SP, LM139A-SP
1
FEATURES
•
•
Common-Mode Input Voltage Range Includes
Ground
•
QML-V Qualified, SMD 5962-7700801VCA,
5962-9673802VCA and 5962-9673802V9B
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage: ±36 V
•
Rad-Tolerant: 40 kRad/sec (Si) TID
(5962-9673802VCA and 5962-9673802V9B)
(1)
•
•
Low Output Saturation Voltage
–
TID Dose Rate = 0.01 rad/sec (Si)
Output Compatible With TTL, MOS, and CMOS
•
•
Wide Supply Ranges
J PACKAGE
(TOP VIEW)
–
–
Single Supply: 2 V to 36 V
(Tested to 30 V)
1
2
3
4
5
6
7
14
13
12
11
10
9
2OUT
1OUT
VCC
OUT3
OUT4
GND
4IN+
4IN−
3IN+
3IN−
Dual Supplies: ±1 V to ±18 V
(Tested to ±15 V)
Low Supply-Current Drain Independent of
Supply Voltage: 0.8 mA (Typ)
1IN−
1IN+
2IN−
2IN+
•
•
•
Low Input Bias Current: 25 nA (Typ)
Low Input Offset Current: 3 nA (Typ) (LM139)
Low Input Offset Voltage: 2 mV (Typ)
8
(1) Radiation tolerance is a typical value based upon initial device
qualification with dose rate = 0.01 rad/sec. Radiation lot
acceptance testing is available - contact factory for details.
DESCRIPTION/ORDERING INFORMATION
These devices consist of four independent voltage comparators that are designed to operate from a single power
supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference
between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode
voltage. Current drain is independent of the supply voltage. The outputs can be connected to other
open-collector outputs to achieve wired-AND relationships.
The LM139 and LM139A are characterized for operation over the full military temperature range of –55°C to
125°C.
Table 1. ORDERING INFORMATION(1)
VIOmax
AT 25°C
TA
MAX VCC
PACKAGE(2)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
5 mV
30 V
30 V
30 V
LM139
LM139A
5962-7700801VCA
5962-9673802VCA(3)
5962-9673802V9B(3)
5962-7700801VCA
5962-9673802VCA
N/A
J
–55°C to 125°C
2 mV
2 mV
KGD
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
(3) Radiation tolerant
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
© 2010–2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.