Datasheet > LL035045035AAV

LL035045035AAV

更新时间： 2025-08-26 20:00:15

品牌	Logo	应用领域
哈勃 - HUBBELL		/
页数	文件大小	规格书
2页	147K
描述
LB3000 Flip Top - Insulated - Low Profile -35W X 45L X 35H (Unheated) - Vented - Pump Guard

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

LL035045035AAV 数据手册

Hot Box Fiberglass

BACKFLOW PREVENTION ASSEMBLY ENCLOSURE

SPECIFICATION

GENERAL

1.1 WORK INCLUDED

A. Provide and install manufactured backflow prevention assembly enclosure.

1.2 QUALITY ASSURANCE

A. Qualifications: The backflow prevention assembly enclosure manufacturer shall be a company specializing

in the manufacture of backflow prevention assembly enclosures with at least 30 years of successful experi-

ence designing and selling enclosures to various customers in different climatic regions.

1.3 STORAGE AND HANDLING

A. Store products in shipping containers and maintain in dry place until installation.

1.4 ACCEPTABLE MANUFACTURERS

A. Hot Box®or Engineer approved equal.

1.5 REFERENCES

A. ASSE 1060-Performance Requirements for Outdoor Enclosures for Backflow Prevention assemblies.

PRODUCTS

2.1 FIBERGLASS ENCLOSURES

A. Available in Drop over, Flip top, Vent Guard, Valve Cover & Roks.

B. Enclosure shall ship fully assembled to allow for quick installation by securing to the concrete pad with the

supplied anchor hardware.

C. Enclosures shall be lockable.

D. Drain ports are sized for full port backflow discharge and are designed for a one way operation allowing

backflow discharge but not allowing wind, debris and small animals to enter the enclosure.

E. Standard enclosures shall be designed to support a minimum vertical load of 100lb/sf.

F. Standard enclosures shall be designed to support wind speeds up to 120mph.

G. Standard enclosures are ASSE 1060 certified.

2.2 MATERIALS OF FABRICATION

A. Fiberglass is minimum of 1/8” thick Thixotropic polyester resin reinforced with fiberglass strand. A smooth

yacht quality finish, protected with UV inhibited isopthalic polyester gel coat.

B. Non molded products will utilize an Industrial exterior texture.

C. No wood or particle board to be used in the construction.

D. Insulation shall be 1”-1.5" unicellular, non-wicking, polyisocyanate foam frothed or sprayed in place.

E. The Insulation shall have the following properties:

R-Value

Dimensional Stability

Compressive Strength

Flame point

Water absorption

Porosity

less than 2% linear change

51psi

325 degrees

.037psf

91%

Hot Box

3621 Industrial Park Drive

Lenoir City, TN 37771

Contact Information

Phone: (800) 346-3062

waterhlc@hubbell.com

www.hot-box.com

中文翻译

下载PDF

与LL035045035AAV相关器件

型号	品牌	获取价格	描述	数据表
LL038BT3810-H	FORMOSA	获取价格	Status : Active; Package : T3810P9; Channel : 8; Directional : Uni; Snap Back : No; VRWM(V
LL03BT0603-H	FORMOSA	获取价格	Status : Active; Package : T0603; Channel : 1; Directional : Bi; Snap Back : Yes; VRWM(V)
LL03BT0603A-H	FORMOSA	获取价格	Status : Active; Package : T0603; Channel : 1; Directional : Bi; Snap Back : Yes; VRWM(V)
LL03BT1006-H	FORMOSA	获取价格	Status : Active; Package : T1006P2; Channel : 1; Directional : Bi; Snap Back : Yes; VRWM(V
LL03V3BTCT0603-H	FORMOSA	获取价格	Status : Active; Package : T0603; Channel : 1; Directional : Bi; Snap Back : Yes; VRWM(V)
LL044053044	HUBBELL	获取价格	LB4000 Flip Top - Insulated - Low Profile -44W X 53L X 44H (Unheated)
LL044053044AAV	HUBBELL	获取价格	LB4000 Flip Top - Insulated - Low Profile -44W X 53L X 44H (Unheated) - Vented - Pump Guar
LL050	HUBBELL	获取价格	1/2 in. Rigid LL Type Body
LL052061052	HUBBELL	获取价格	LB5000 Flip Top - Insulated - Low Profile -52W X 61L X 52H (Unheated)
LL052061052AAV	HUBBELL	获取价格	LB5000 Flip Top - Insulated - Low Profile -52W X 61L X 52H (Unheated) - Vented - Pump Guar

产品中心

服务支持

精选活动

关于我们

帮助中心

LL035045035AAV

LL035045035AAV 数据手册

与LL035045035AAV相关器件

与LL035045035AAV相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

LL035045035AAV

LL035045035AAV 数据手册

与LL035045035AAV相关器件

与LL035045035AAV相关文章

您还可以找

您在本页遇到什么问题？