Datasheet > LKP5660-6EPD6TB1

LKP5660-6EPD6TB1

更新时间： 2024-11-26 05:25:27

品牌	Logo	应用领域
BEL		/
页数	文件大小	规格书
23页	887K
描述
AC-DC Power Factor Correction Module, 1 Output, 250W, Hybrid, METAL, CASE K02, MODULE

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

LKP5660-6EPD6TB1 数据手册

Cassette Style

AC-DC Converters

KP Series

250 Watt AC-DC Converters with PFC

KP Series

Input voltage from 187...255 V AC

1 or 2 isolated outputs up to 56.5 V DC

4 kV AC I/O electric strength test voltage

• Power factor >0.95, harmonics <IEC/EN61000-3-2

• Output power up to 280 Watt

• Input over- and undervoltage lock-out

• Efficient input filter and built-in surge and transient

suppression circuitry

• Fully isolated outputs

• Outputs open- and short-circuit proof

Safety according to IEC/EN 60950

LGA

111

4.4"

3 U

168

6.6"

Summary

3.2"

16 TE

The KP series is an extension of the K series ofAC-DC con-

verters with an increased output power level of up to 280 W

depending on the operating ambient temperature require-

ments. The KP converters are optimized for use in

230 V AC mains applications and feature high efficiency,

high reliability, low output voltage noise and excellent dy-

namic response to load/line changes.

Full input to output, input to case, output to case and output

to output isolation is provided. The modules are designed

and built according to the international safety standards

IEC/EN 60950.

The case design allows operation up to an operating ambi-

ent temperature of 71°C with reduced output power. De-

pending on the ambient temperature requirements, how-

ever, the output power can be up to 280 W.

The converter inputs are protected against surges and tran-

sients occuring at the source lines. An input over- and

undervoltage lock-out curcuitry disables the outputs if the

input voltage is outside the specified range. The LKP types

include an inrush current limitation preventing circuit break-

ers and fuses from being damaged at switch-on.

An internal temperature sensor generates an inhibit signal

which disables the outputs if the case temperature T_Cex-

ceeds the specified limit. The outputs are automatically re-

enabled when the temperature drops below the limit.

The outputs are open- and short-circuit proof and are pro-

tected against overvoltages by means of a built-in suppres-

sor diode. The outputs can be inhibited by a logic signal

applied to the connector pin 18 (i). If the inhibit function is

not used pin 18 must be connected with pin 14 to enable

the outputs (fail safe).

Various options are available to adapt the converters to in-

dividual applications. Especially for battery charger applica-

tions an external temperature sensor has been designed to

allow for temperature compensated battery charging.

LED indicators display the status of the converter and allow

visual monitoring of the system at any time.

The modules may either be plugged into 19" rack systems

according to DIN 41494 or be chassis mounted.

Table of Contents

Page

Summary .......................................................................... 1

Type Survey and Key Data .............................................. 2

Type Key .......................................................................... 2

Functional Description...................................................... 3

Electrical Input Data ......................................................... 4

Electrical Output Data ...................................................... 6

Auxiliary Functions ......................................................... 10

Electromagnetic Compatibility (EMC) ............................ 14

Immunity to Environmental Conditions........................... 15

Mechanical Data ............................................................ 16

Safety and Installation Instructions ................................ 17

Description of Options.................................................... 20

Accessories .................................................................... 23

Edition 6/5.2000

1/23

12 3 4 5 6 7...23

中文翻译

下载PDF

与LKP5660-6EPD6TB1相关器件

型号	品牌	获取价格	描述	数据表
LKP5660-6EPD7	BEL	获取价格	AC-DC Power Factor Correction Module, 2 Output, 250W, HEAT SINK, METAL, CASE K02, MODULE
LKP5660-6EPD7T	BEL	获取价格	AC-DC Power Factor Correction Module, 2 Output, 250W, Hybrid, HEAT SINK, METAL, CASE K02,
LKP5660-6EPD7TB1	BEL	获取价格	AC-DC Power Factor Correction Module, 2 Output, 250W, Hybrid, METAL, CASE K02, MODULE
LKP5660-6EPD8	BEL	获取价格	AC-DC Power Factor Correction Module, 2 Output, 250W, HEAT SINK, METAL, CASE K02, MODULE
LKP5660-6EPD8T	BEL	获取价格	AC-DC Power Factor Correction Module, 2 Output, 250W, Hybrid, HEAT SINK, METAL, CASE K02,
LKP5660-6EPD8TB1	BEL	获取价格	AC-DC Power Factor Correction Module, 2 Output, 250W, Hybrid, METAL, CASE K02, MODULE
LKP5660-6EPDD	BEL	获取价格	AC-DC Power Factor Correction Module, 2 Output, 250W, HEAT SINK, METAL, CASE K02, MODULE
LKP5660-6EPDDTB1	BEL	获取价格	AC-DC Power Factor Correction Module, 2 Output, 250W, METAL, CASE K02, MODULE
LKP5660-6ERD0T	BEL	获取价格	AC-DC Power Factor Correction Module, 2 Output, 250W, Hybrid, HEAT SINK, METAL, CASE K02,
LKP5660-6ERD1B1	BEL	获取价格	AC-DC Power Factor Correction Module, 2 Output, 250W, Hybrid, METAL, CASE K02, MODULE

与LKP5660-6EPD6TB1相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

42
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

33
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

61
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

57

产品中心

服务支持

精选活动

关于我们

帮助中心

LKP5660-6EPD6TB1

LKP5660-6EPD6TB1 数据手册

与LKP5660-6EPD6TB1相关器件

与LKP5660-6EPD6TB1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

LKP5660-6EPD6TB1

LKP5660-6EPD6TB1 数据手册

与LKP5660-6EPD6TB1相关器件

与LKP5660-6EPD6TB1相关文章

您还可以找

您在本页遇到什么问题？