Specification for an SMD LC Filter
MtronPTI P/N: LF9248
I. GENERAL & ELECTRICAL REQUIREMENTS:
1. CENTER FREQUENCY (FO): 2200MHz nominal
2. BANDWIDTH @ 1dB: 400MHz to 475.2MHz
3. INSERTION LOSS (@ peak of transmission): < 2.0dBa
4. REJECTION
@ 1700MHz: 60dBc minimum
@ 2750MHz: 60dBc minimum
5. ZIN/ZOUT: 50Ω nominal
II. ENIVIRONMENTAL & PHYSICAL REQUIREMENTS:
1. TEMPERATURE RANGE
Operating: 0°C to +50°C
Storage: -40°C to +85°C
2. PACKAGE Note 1: SMD (see Figure 1 & 2)
3. SOLDERABILITY: Per EIAJ-STD-002 (see Figure 3)
Note 1: Sn10 solder will be utilized throughout the construction and sealing of the LF9248. Therefore, it will support automated
assembly processing. Including; Pick & Place, reflow soldering and post-reflow aqueous and non-aqueous wash.
Note 2: The LF9248 can be supplied on tape & reel but the MOQ for tape & reel is 100-units.
III. DIMENSIONS:
Figure 2: Recommended PAD Layout
Figure 1: Package Outline Drawing
Rev. - 06/16/10
Page 1 of 2
Proprietary Document Information contained herein is proprietary to MtronPTI and is
submitted in confidence. Information may not be copied or divulged without written
permission from MtronPTI.