APPLICABLE STANDARD
-25 C TO +85 C
-10
C TO +60 C
Operating
Storage temperature
range
Rating
temperature range
Voltage
Contact No.A to D AC 125 V, DC 125
Contact No.1 to 7 AC 30 V, DC 42
V
V
Wire size
Contact No.A to D : MAX AWG#16
Contact No.1 to 7 : MAX AWG#26
―
Current
Contact No.A to D:10A,Contact No.1 to 7:2A Applicable cable
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
Construction
X
X
X
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
According to drawing.
X
Electric characteristics
X
X
X
X
X
X
15
m MAX.
Contact resistance
Contact shall be measured at DC 1 A(Contact No.1 to 7)
Contact shall be measured at DC 1 A(Contact No.A to D)
5
m MAX
M MIN.
1000
Insulation resistance
100 V DC.(Between contacts for 2A, contact for 2A-SHELL)
500 V DC.(Between contacts for 10A, contact for 10A-contact for
2A, contact for 10A-SHELL)
X
X
Voltage proof
300 V AC for 1 min.(Between contacts for 2A, contact for 2A-
SHELL)
No breakdown.
1250 V AC for 1 min.(Between contacts for 10A, contact for 10A-
contact for 2A, contact for 10A-SHELL)
Mechanical characteristics
Contact insertion and
Insertion and withdrawal forces : ― N MIN.
Insertion and withdrawal forces : ― N MIN.
－
－
― by steel gauge.(Contact for 2A)
― by steel gauge.(Contact for 10A)
withdrawal forces
X
X
Connector mating and
unmating forces
Measured by applicable connector.
Insertion and withdrawal forces : Locking
device with unlock 50 N MAX.
－
－
Contact resistance:30m MAX.(Contact No.1 to 7)
Contact resistance:10m MAX.(Contact No.A to D)
①No electrical discontinuity of 10 s.
Mechanical operation
Mated and unmated 1,000 times.
Vibration
Shock
Frequency: 10 → 55 → 10 (Hz) (1CYC,5min),
X
－
single amplitude 0.75 mm, at 10 CYC,for 3 directions. ②No damage, crack and looseness, of parts.
① No electrical discontinuity of 10 s.
② No damage, crack and looseness, of parts.
In opposite directions of each 3 demension axis for 3
times at 490 m/s2 half sine wave pulses of 11 ms.
X
X
－
－
Breaking strength
Max 100 N shall be applied to cable in up and
down,left and right directions when mated.
No breakage max 50N.
Environmental characteristics
Damp heat
Exposed at 40 ℃, 90 to 95 ％, 96 h.
①Insulation resistance:10 MΩ MIN (at high humidity).
②Insulation resistance:100 MΩ MIN (at dry).
③No damage, crack and looseness of parts.
X
－
(Steady state)
Rapid change of temperature Temperature -55→ R/T(1) → +85 → R/T ℃
① Insulation resistance: 100 MΩ MIN.
X
－
time 30 → 2 to 3 → 30 → 2 to 3 min under 5 cycles. ② No damage, crack and looseness of parts.
X
X
Corrosion salt mist
Dry heat
Exposed in 5 % salt water spray for 48 h.
No heavy corrosion ruin the function.
－
－
Exposed at + 85 ℃,96 h.
No damage, crack and looseness of parts.
X
－
Cold
Exposed at - 55 ℃,96 h.
No damage, crack and looseness of parts.
No deformation of case of excessive looseness
of the terminals.
Resistance to soldering
heat
Solder temperature, +350±10℃, for immersion
duration, 5±1 s.
X
X
－
－
Solderability
Soldered at solder temperature, +350±10℃ for
immersion duration, 2 to 3 s.
Solder surface to be free from pin-hole, no
wetting and other defects.
(2)
Sealing
Exposed at a depth of 1.8 m for 48 h.
No water penetration inside connector.
X
X
－
－
Air tightness(2)
Apply air pressure 17.6kPa for 0.5min to inside
connector.
No air bubbles inside connector.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
APPROVED
CHECKED
DESIGNED
EJ.KUNII
EJ.KUNII
20220301
20220301
20220228
Notes(1) R/T：Room temperature
(2)Sealing and air tightness shall be tested under mated condition
with an applicable connector.
TR.YAMANOUE
DRAWN
TR.YAMANOUE
20220228
Unless otherwise specified, refer to IEC 60512（JIS C 5402).
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-119541-00-00
LF13WBRB-11P
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
CL0136-1024-0-00
△
FORM HD0011-2-1
5秒后页面跳转
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
意法半导体发布第四代SiC技术，助力电动汽车电驱
联发科推出全球首款3纳米汽车芯片CT-X1，挑战高通SA8295
国家大基金减持三家半导体企业，市场反应各异
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
