APPLICABLE STANDARD
-25 C TO +85 C
-10
C TO +60 C
OPERATING
STORAGE TEMPERATURE
RANGE
RATING
TEMPERATURE RANGE
VOLTAGE
AC 30 V , DC 42 V
2 A
WIRE SIZE
CURRENT
APPLICABLE CABLE
φ5
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
✕
✕
✕
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
✕
ELECTRIC CHARACTERISTICS
✕
✕
✕
✕
15
m MAX.
M MIN.
CONTACT RESISTANCE
CONTACT SHALL BE MEASURED AT DC
1
A
1000
INSULATION RESISTANCE
100
300
V DC.
✕
✕
VOLTAGE PROOF
V AC. FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
CONTACT INSERTION AND
WITHDRAWAL FORCES
φ0.53±0.003 BY STEEL GAUGE.
INSERTION AND WITHDRAWAL FORCES : 0.15 N MIN.
INSERTION AND WITHDRAWAL FORCES : 25 N MAX.
✕
✕
-
-
CONNECTOR INSERTION AND
WITHDRAWAL FORCES
MEASURED BY APPLICABLE CONNECTOR WITHOUT LOCKING
DEVICE.
CONTACT RESISTANCE:
30
m MAX.
MECHANICAL OPERATION
1000 TIMES INSERTIONS AND EXTRACTIONS.
✕
✕
-
-
①NO ELECTRICAL DISCONTINUITY OF 10 s.
VIBRATION
SHOCK
FREQUENCY: 10 → 55 → 10 (Hz) (1CYC,5min),
SINGLE AMPLITUDE 0.75 mm, AT 10 CYC,FOR 3 DIRECTIONS. ②NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② NO DAMAGE, CRACK AND LOOSENESS, OF PARTS.
IN OPPOSITE DIRECTIONS OF EACH 3 DIMENSION AXIS FOR 3
TIMES AT 490 m/s2 DURACTIONS OF PULSE 11 ms.
✕
✕
-
-
BREAKING STRENGTH
MAX 100N SHALL BE APPLIED TO CABLE IN UP AND DOWN,
LEFT AND RIGHT DIRECTIONS WHEN MATED.
NO BREAKAGE MAX 100N.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
EXPOSED AT 40 ℃, 90 TO 95 %, 96 h.
① INSULATION RESISTANCE: 10 MΩ MIN
(AT HIGH HUMIDITY).
✕
-
(STEADY STATE)
② INSULATION RESISTANCE: 100 MΩ MIN
(AT DRY).
③ NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
① INSULATION RESISTANCE: 100 MΩ MIN.
RAPID CHANGE OF TEMPERATURE TEMPERATURE -55→ R/T(1) → +85 → R/T ℃
✕
-
TIME 30 → 2 TO 3 → 30 → 2 TO 3 min UNDER 5 CYCLES. ② NO DAMAGE.CRACK AND LOOSENESS OF PARTS.
EXPOSED IN 5 SALT WATER SPRAY FOR 500 h.
EXPOSED AT + 85 ℃,96 h.
CORROSION SALT MIST
DRY HEAT
NO HEAVY CORROSION RUIN THE FUNCTION.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
✕
✕
✕
✕
-
-
-
-
COLD
EXPOSED AT - 55 ℃,96 h.
RESISTANCE TO SOLDERING
HEAT
SOLDER TEMPERATURE, +350±10℃, FOR IMMERSION
DURATION, 5±1 s.
NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS
OF THE TERMINALS.
SOLDERABILITY
SOLDERED AT SOLDER TEMPERATURE, +350±10℃ FOR
IMMERSION DURATION, 2 TO 3 s.
SOLDER SURFACE TO BE FREE FROM PIN-HOLE, NO
WETTING AND OTHER DEFECTS.
✕
-
SEALING(2)
EXPOSED AT A DEPTH OF 1.8 m FOR 48 h.
NO WATER PENETRATION INSIDE CONNECTOR.
✕
✕
-
-
AIR TIGHTNESS(2)
APPLY AIR PRESSURE 17.6kPa FOR 0.5min TO INSIDE
CONNECTOR.
NO AIR BUBBLES INSIDE CONNECTOR.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
APPROVED
CHECKED
DESIGNED
DRAWN
NOTES
TP.KOMATSU
20231227
20231227
20231227
20231227
EJ.KUNII
MK.WADA
MK.WADA
Unless otherwise specified, refer to IEC 60512(JIS C 5402).
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-117383-33-00
LF07WBPD-6S(33)
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
CL0136-0020-6-33
△
FORM HD0011-2-1