KILOVAC LEV200 Series Contactor With 1 Form X
Contacts Rated 500+ Amps, 12-900Vdc
Product Facts
I Designed to be the lowest cost
sealed contactor in the industry
with its current rating (500+A
carry, 2000A interrupt at
320Vdc).
I Available with bottom or side
mounting -- not position
senstive.
I Optional auxiliary contact for
easy monitoring of power
contact position.
I Hermetically sealed –
intrinsically safe, operates in
explosive/harsh environments
with no oxidation or
contamination of coils or
contacts, including long periods
of non-operation.
I Typical applications include
battery switching and backup,
DC voltage power control, circuit
protection and safety.
I Versatile coil/power
connections.
For factory-direct application assistance, contact Earle Alldredge, product manager.
Dial 800-253-4560, ext. 2055, or 805-220-2055. Email earle.alldredge@tycoelectronics.com
I Designed and built in
accordance to AIAG QS9000.
RoHS
Ready
Performance Data
Parameter
Units Value for LEV200 Series
1 Form X (SPST-NO-DM)
Vdc 12 - 900
Coil Data (valid over temperature range) 4/
Contact Arrangement, power contacts
Rated Operating Voltage
Nominal Voltage
12Vdc
9.0Vdc
15Vdc
24Vdc
19.0Vdc
30Vdc
48Vdc
38.0Vdc
Pickup Voltage (will operate)
Voltage (Max.)
Continuous (Carry) Current, Typical
A
500 @ 65°C, 400 mcm conductors
60Vdc
Consult Factory for required conductors for higher (500+ A) currents
Dropout Voltage
0.75 - 2.0Vdc 1.0 - 5.0Vdc
11 ohms 40 ohms
2.0 - 7.0Vdc
145 ohms
Make/Break Current at Various Voltages 1
A
A
See next page
/
Coil Resistance @ 25° (Typ.)
Break Current at 320Vdc 1
2,000, 1 cycle 3
/
/
Part Numbering System
Contact Resistance, Typ. (@200A)
Load Life
mohms 0.2
Cycles See next page
Cycles 100,000
Typical Part Number
LEV200
A
4
N
A
A
Mechanical Life
Series:
Contact Arrangement, auxiliary contacts
1 Form A (SPST-NO)
2A @ 30Vdc / 3A @ 125Vac
LEV200 = 500+ Amp, 12-900Vdc Contactor
Aux. Contact Current, Max.
Aux. Contact Current, Min.
A
Contact Form:
A = Normally Open
mA 100mA @ 8V
Aux. Contact Resistance, Max.
ohms 0.417@ 30Vdc / .150 @ 125Vaac
H = Normally Open with Aux. Contacts. (Option “H” requires
option “A” in Coil Wire Length and option “N” in Coil
Terminal Connector.)
Operate Time @ 25°C
Close (includes bounce), Typ.
Bounce (after close only), Max.
ms
ms
25
7
Note: Other auxiliary contact forms available. Consult factory.
Coil Voltage:
4 = 12Vdc
8 = 96Vdc
Release (includes arcing), Max @ 2000A ms
12
5 = 24Vdc
L = 110Vdc
6 = 48Vdc
O = 115Vac
K = 72Vdc
9 = 240Vac
Dielectric Withstanding Voltage
Insulation Resistance @ 500Vdc
Shock, 11ms 1/2 sine, peak, operating
Vibration, sine, 80-2000Hz., peak
Operating Ambient Temperature
Weight, Typical
Vrms 2,200 @ sea level (leakage <1mA)
megohms 100 2
/
Notes: Consult factory for detailed specifications and availability of
coils not listed in “Coil Data” table above.
G
G
20
In coil voltage codes, 115Vac is designated by the letter “O”
rather than the numeral “0.”
20
°C
-40 to +85
Coil Wire Length:
A = 15.3 in (390 mm)
lb.(kg) 1.3 (.60)
N = None (Requires option “A” in next step.)
Coil Terminal Connector:
1/ Main power contacts
2/ 50 at end of life
N = None, stripped wires (Requires option “A” in previous step.)
A = Studs, #10-32 Threaded (Electrical connection is made to the tab
at the base of the stud.)
3/ Does not meet dielectric & IR after test, 1700 amp for unit with Aux. Contacts
4/ Contacts will operate with 0.8V
nom coil
< V < 1.1V over temperture range.
Note: Specify option A, stripped wires, for coil voltages > 96Vdc
nom
Mounting & Power Terminals:
A = Bottom Mount & Male 10mm x M8 Threaded Terminals
F = Side Mount & Male 10mm x M8 Threaded Terminals
© 2007 by Tyco Electronics Corporation. All Rights Reserved.
KILOVAC, TE Logo and Tyco Electronics are trademarks.
Other products and company names mentioned herein may be trademarks of their
respective owners.
Consult factory regarding other available mountings and power terminals.
NOTE: All part numbers are RoHS compliant (and always have been).
1
Catalog 9-1773439-1
Revised 6-08
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
www.tycoelectronics.com
UK: 44-141-810-8967