LED8102S
Datasheet
8-channel LED driver with direct switch control
Features
•
•
•
•
•
•
•
•
•
8 constant current output channels controlled by switch inputs
Output enable input for global dimming
Output current: from 5 mA to 100 mA
HTSSOP16
(Exposed pad)
Current programmable through external resistor
Supply voltage: 3 V to 5.5 V
Thermal shutdown
19 V current generators rated voltage
Available in high thermal efficiency TSSOP exposed pad package
ESD protection 2.0 kV HBM, 100 V MM
Applications
•
White and RGB lighting and Backlight
–
–
–
Appliance display and human interface
Industrial display and function indicator
Architectural Lighting
Description
The LED8102S is a monolithic, low voltage, 8 low-side-channel LED driver. The
LED8102S guarantees up to 19 V output driving capability allowing users to connect
several LEDs in series. In the output stage, 8 regulated current sources provide from
5 mA to 100 mA constant current to drive the LEDs. Current is programmed through
a single external resistor.
Maturity status link
LED8102S
LED8102S is equipped with a thermal management that protects the device forcing
it in shutdown (typically: power-off at 170 °C with 15 °C hysteresis to restart). The
thermal protection switches OFF only the output channels.
Device summary
Order code
LED8102SXTTR
HTSSOP16
Package
Packing
The operative supply voltage range is between 3 V and 5.5 V. The output control
is provided by four switch inputs, providing an on/off toggle action suitable also for
local dimming. Moreover, on all active output LEDs brightness can be adjusted with a
global PWM signal applied to the output enable pin (OE). Outputs can be connected
in parallel, or left unconnected if not used, as required by the application.
2500 parts per reel
DS12963 - Rev 3 - February 2021
For further information contact your local STMicroelectronics sales office.
www.st.com