Datasheet > LE026083045

LE026083045

更新时间： 2025-08-26 20:00:15

品牌	Logo	应用领域
哈勃 - HUBBELL		/
页数	文件大小	规格书
2页	147K
描述
EZ3S EZ Box - Insulated -26W X 83L X 45H (Unheated) - Drop Over

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

LE026083045 数据手册

Hot Box Fiberglass

BACKFLOW PREVENTION ASSEMBLY ENCLOSURE

SPECIFICATION

GENERAL

1.1 WORK INCLUDED

A. Provide and install manufactured backflow prevention assembly enclosure.

1.2 QUALITY ASSURANCE

A. Qualifications: The backflow prevention assembly enclosure manufacturer shall be a company specializing

in the manufacture of backflow prevention assembly enclosures with at least 30 years of successful experi-

ence designing and selling enclosures to various customers in different climatic regions.

1.3 STORAGE AND HANDLING

A. Store products in shipping containers and maintain in dry place until installation.

1.4 ACCEPTABLE MANUFACTURERS

A. Hot Box®or Engineer approved equal.

1.5 REFERENCES

A. ASSE 1060-Performance Requirements for Outdoor Enclosures for Backflow Prevention assemblies.

PRODUCTS

2.1 FIBERGLASS ENCLOSURES

A. Available in Drop over, Flip top, Vent Guard, Valve Cover & Roks.

B. Enclosure shall ship fully assembled to allow for quick installation by securing to the concrete pad with the

supplied anchor hardware.

C. Enclosures shall be lockable.

D. Drain ports are sized for full port backflow discharge and are designed for a one way operation allowing

backflow discharge but not allowing wind, debris and small animals to enter the enclosure.

E. Standard enclosures shall be designed to support a minimum vertical load of 100lb/sf.

F. Standard enclosures shall be designed to support wind speeds up to 120mph.

G. Standard enclosures are ASSE 1060 certified.

2.2 MATERIALS OF FABRICATION

A. Fiberglass is minimum of 1/8” thick Thixotropic polyester resin reinforced with fiberglass strand. A smooth

yacht quality finish, protected with UV inhibited isopthalic polyester gel coat.

B. Non molded products will utilize an Industrial exterior texture.

C. No wood or particle board to be used in the construction.

D. Insulation shall be 1”-1.5" unicellular, non-wicking, polyisocyanate foam frothed or sprayed in place.

E. The Insulation shall have the following properties:

R-Value

Dimensional Stability

Compressive Strength

Flame point

Water absorption

Porosity

less than 2% linear change

51psi

325 degrees

.037psf

91%

Hot Box

3621 Industrial Park Drive

Lenoir City, TN 37771

Contact Information

Phone: (800) 346-3062

waterhlc@hubbell.com

www.hot-box.com

中文翻译

下载PDF

与LE026083045相关器件

型号	品牌	获取价格	描述	数据表
LE02R05S09F/H	ETC	获取价格	Analog IC
LE02R05S09J/H	ETC	获取价格	Analog IC
LE02R12S09F/H	ETC	获取价格	Analog IC
LE02R12S09J/H	ETC	获取价格	Analog IC
LE035045035	HUBBELL	获取价格	EZ3000 EZ Box - Insulated -35W X 45L X 35H (Unheated) - Drop Over
LE044053044	HUBBELL	获取价格	EZ4000 EZ Box - Insulated -44W X 53L X 44H (Unheated) - Drop Over
LE0504FT1G	LRC	获取价格	STEERING DIODE/TVS ARRAY COMBO
LE052061050	HUBBELL	获取价格	EZ5000 EZ Box - Insulated -52W X 61L X 50H (Unheated) - Drop Over
LE096A4M	ETC	获取价格	Optoelectronic
LE096A4V	ETC	获取价格	Optoelectronic