LDS0705 Series
Shielded Power Inductors
Description
RoHS
2002/95/EC
• 125°C maximum temperature operation
• 7.8mm x 7.0mm x 5.0mm shielded drum core
• Ferrite core material
• Metalized core mounting utilizes board space
• Inductance range from 0.82µH to 470µH
• Current range from 8.57 Amps to 0.368 Amps
• Frequency range up to 1MHz
Applications
• Buck or Boost Inductor
• Noise filtering and output filter chokes
• Battery Power, DC-DC converters
• Notebook power, PDA’s, Hand held computers
• DVD players
• Cellular phones
Packaging
• Supplied in tape and reel packaging, 1000 per reel
Environmental Data
• Storage temperature range: -40°C to +125°C
• Operating temperature range: -40°C to +125°C
(range is application specific)
• Solder reflow temperature: +260°C max. for 10 seconds
maximum
Part Number
Rated
Inductance
(µH)
0.82
OCL (1)
µH
Irms(2)
Isat (3)
DCR (Ω)
@20°C
(Typical)
0.0040
0.0061
0.009
0.013
0.021
0.024
0.033
0.036
0.056
0.084
0.107
0.158
0.240
0.323
0.357
0.554
0.68
K-factor
(4)
Amperes
Amperes
LDS0705-R82M-R
LDS0705-1R5M-R
LDS0705-2R2M-R
LDS0705-3R3M-R
LDS0705-4R7M-R
LDS0705-6R8M-R
LDS0705-8R2M-R
LDS0705-100M-R
LDS0705-150M-R
LDS0705-220M-R
LDS0705-330M-R
LDS0705-470M-R
LDS0705-680M-R
LDS0705-820M-R
LDS0705-101M-R
LDS0705-151M-R
LDS0705-221M-R
LDS0705-331M-R
LDS0705-471M-R
0.861 20ꢀ
1.42 20ꢀ
2.13 20ꢀ
2.97 20ꢀ
5.08 20ꢀ
6.34 20ꢀ
7.75 20ꢀ
9.30 20ꢀ
14.78 20ꢀ
21.53 20ꢀ
32.50 20ꢀ
45.71 20ꢀ
69.76 20ꢀ
83.67 20ꢀ
98.9 20ꢀ
152.0 20ꢀ
216.5 20ꢀ
329.9 20ꢀ
467.0 20ꢀ
7.68
6.17
5.06
4.19
3.32
3.11
2.67
2.54
2.04
1.66
1.48
1.21
0.985
0.850
0.808
0.649
0.584
0.470
0.387
8.57
6.67
5.45
4.62
3.53
3.16
2.86
2.61
2.07
1.71
1.40
1.18
0.952
0.870
0.800
0.645
0.541
0.438
0.368
24.8
19.3
15.8
13.4
10.2
9.2
8.3
7.6
6.0
5.0
4.0
3.4
2.8
2.5
2.3
1.9
1.6
1.3
1.5
2.2
3.3
4.7
6.8
8.2
10.0
15.0
22.0
33.0
47.0
68.0
82.0
100.0
150.0
220.0
330.0
470.0
1.06
1.56
1.1
(1) Open Circuit Inductance Test Parameters: 100kHz, 0.1V, 0.0Adc.
(2) Irms: DC current for an approximate ∆T of 30°C without core loss. Derating is
necessary for AC currents. PCB layout, trace thickness and width, air-flow, and
proximity of other heat generating components will affect the temperature rise. It
is recommended that the temperature of the part not exceed 125°C under worst
case operating conditions verified in the end application.
(4) K-factor: Used to determine B p-p for core loss (see graph).
B p-p = K*L*∆I, B p-p(mT), K: (K factor from table), L: (Inductance in µH),
∆I (Peak to peak ripple current in Amps).
(5) Part Number Definition: LDS0705-xxx-R
LDS0705 = Product code and size; -xxx = Inductance value in uH;
R = decimal point; If no R is present, third character = # of zeros.
M = Inductance tolerance +/- 20ꢀ -R suffix = RoHS compliant
(3) Isat Amperes peak for approximately 15ꢀ rolloff (@25°C)