te.com
HORIZONTAL COMPACT
SHORT-SWING
LIQUID LEVEL SENSORS
LCS Series
High or low level switching
N.O./N.C. SPST output
Mounted on the side wall of a tank
Certified reed switch (UL component listed)
Body material is acetal and float is polypropylene
The LCS series of point liquid level switch demonstrates a high degree of
reliability due to the use of non-reactive wetted components and a unique
reed switch designed specifically for level sensing applications. The
sensor utilizes a moving float with an embedded magnet to activate a
reed switch located in the sensor body. As the liquid level raises the float,
it moves a magnet into close proximity of the reed switch and actuates it
to give an open contact or closed contact switch indication.
Features
Voltage rating up to 250VAC
Current rating up to 1.0 amp
Compact design and low profile
Cable or integrated connector
Rapid Push Fit Installation
EPDM Sealing Grommet
The reliability of this sensor results from a very simple operating principle,
a single moving part, media compatible wetted materials, and a unique
reed switch design that has a UL recognized component certification.
The sensor quickly mounts into the side wall of a liquid storage tank using
a unique push fit design. This is an external configuration. The output is a
simple N.O. or N.C. SPST reed switch that utilizes Ruthenium contact
points for reliability. Changing from a N.O. output to a N.C. output is done
by rotating the switch 180° in the mounting hole. This change can be
done in the field. Electrical outputs are a single pair of wires with PVC
insulation and a length of 0.5m, or one of three optional integrated
connector designs.
Applications
Water storage tanks
Full and/or empty detection
Pump on/off controls
Marine bilge and ballast tanks
Flood detection and prevention
Coolant level indication
Livestock watering tanks
Irrigation systems
Water treatment plants
›
CLICK HERE
CONNECT WITH A SPECIALIST
Page 1
TE CONNECTIVITY SENSORS /// LCS SERIES
10/2020