FEATURES
• 15 WATTS MAXIMUM OUTPUT POWER
• SINGLE OUTPUT UP TO 4A
• SMALL SIZE AND LOW PROFILE:1.0 x 1.0 x 0.39 Inch
• HIGH EFFICIENCY UP TO 89%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• INPUT TO OUTPUT ISOLATION
• INDUSTRY STANDARD PIN-OUT FEC15 SERIES COMPATIBLE
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC
• UL60950-1, EN60950-1 AND IEC60950-1 LICENSED
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
APPLICATIONS
OPTIONS
Wireless Network
Positive logic Remote On/Off, Without trim, Without On/Off pin
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
LCD15 DC/DC converters provide up to 15 watts of output power in an industry standard
package and footprint. These units are specifically designed to meet the power needs of low
profile. All models feature with 2:1 wide input voltage of 9-18 VDC, 18-36 VDC and
36-75VDC, comprehensively protected against over-current, over-voltage and input
under-voltage protection conditions, and trimmable output voltage.
T E C H N I C A L
S P E C I F I C
A
T I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
12V nominal input
9 – 18VDC
18 – 36VDC
36 – 75VDC
36VDC
50VDC
100VDC
30mAp-p
30ms, max.
30ms, max.
9VDC
Output power
15 Watts
Input voltage range
24V nominal input
48V nominal input
12V input
24V input
48V input
Voltage accuracy
Full load and nominal Vin
±1%
0%
Minimum load
Input surge voltage
100mS max
Voltage adjustability (Note 6)
±10%
± 0.2%
± 0.5%
Single
Dual
Line regulation
Load regulation
LL to HL at Full Load
No Load to Full Load
Input reflected ripple current
Start up time
Nominal Vin and full load
Nominal Vin and
constant resistive load Remote ON/OFF
Power up
± 0.2%
± 1.0%
Single
Dual
12V input
24V input
48V input
12V input
24V input
48V input
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
See
table
Start-up voltage
17VDC
33VDC
8VDC
14.5VDC
30.5VDC
20MHz bandwidth
(Measured with a 1uF M/C and a 10uF T/C)
Ripple and noise
±0.02% / ºC, max.
Temperature coefficient
Shutdown voltage
Transient response recovery time 25% load step change
3.3V output
Over voltage protection
250uS
3.7VDC-5.4VDC
5.6VDC-7.0VDC
13.5VDC-19.6VDC
16.8VDC-20.5VDC
Remote ON/OFF (Note 7)
Positive logic(Option)
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Open or 3 V < Vr < 15V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 15V
-0.5mA~1.0mA
5V output
12V output
15V output
Negative logic(Standard)
Over load protection
% of FL at nominal input
150%, typ.
Input current of Remote control pin
Remote off state input current
Nominal Vin
Nominal Vin
Short circuit protection
Hiccup, automatics recovery
2.5mA
GENERAL SPECIFICATIONS
Efficiency
ENVIRONMENTAL SPECIFICATIONS
See table
1600VDC, min.
1000VDC, min.
-40℃ to +85℃ (with derating)
Operating ambient temperature
Maximum case temperature
Storage temperature range
Input to Output
Input(Output) to Case
Isolation voltage
105ºC
-55ºC ~ +125ºC
18.2℃/Watt
15.8℃/Watt
MIL-STD-810F
MIL-STD-810F
5% to 95% RH
9
Isolation resistance
Isolation capacitance
Switching frequency
Approvals and standard
Case material
10 ohms, min.
Thermal impedance
(Note 8)
Nature convection
Nature convection with heat-sink
1000pF, max.
400KHz, typ.
Thermal shock
Vibration
IEC60950-1, UL60950-1, EN60950-1
Nickel-coated copper
FR4 PCB
Relative humidity
Base material
EMC CHARACTERISTICS
Potting material
Epoxy (UL94-V0)
EMI (Note 9)
EN55022
Class A
1.0 X 1.0 X 0.39 Inch
(25.4 X 25.4 X 9.9 mm)
Dimensions
Weight
± 8KV
± 6KV
Air
Contact
ESD
EN61000-4-2
Perf. Criteria A
15g
BELLCORE TR-NWT-000332
MIL-HDBK-217F
1.330x106hrs
5.630x105hrs
Radiated immunity
EN61000-4-3
10 V/m Perf. Criteria A
MTBF (Note 1)
± 2KV
± 1KV
Fast transient (Note 10) EN61000-4-4
Perf. Criteria A
Perf. Criteria A
Surge (Note 10)
EN61000-4-5
EN61000-4-6
Conducted immunity
3 Vr.m.s Perf. Criteria A
Page 1 of 3 Issued Date:2008/05/21