Ordering number : ENA1650A
CMOS IC
Mobile FM Multiplex Broadcast IC
with On-Chip VICS Decoder
LC72715PW
Overview
The LC72715PW is a data demodulation LSI for receiving FM multiplex broadcasts for mobile reception in the DARC
format. This LSI includes an on-chip bandpass filter for extracting the DARC signal from the FM baseband signal. It
also integrates a decoder that performs the VICS data processing on the same chip and can implement a compact,
multifunction VICS reception system. LC72715PW is control-compatible with LC72714W and LC72710LW.
(Description of dGPS reception function has been deleted, because the dGPS service finished at the end of March 2008).
Note that a contract with the VICS Center is required to evaluate this LSI’s sample and to produce VICS compatible
products. It also requires a contract with the NHK Engineering Service to produce VICS compatible products.
Functions
• Adjustment-free 76kHz SCF bandpass filter
• Built-in VICS decoder
• MSK delay detection system based on a 1T delay.
• Error correction function based on a 2T delay (in the MSK detection stage)
• Digital PLL based clock regeneration function
• Shift-register 1T and 2T delay circuits
• Block and frame synchronization detection circuits
• Functions for setting the number of allowable BIC errors and the number of synchronization protection operations.
• Error correction using (272, 190) codes
• Built-in layer 4 CRC code checking circuit
• On-chip frame memory and memory control circuit for vertical correction
• 7.2MHz crystal oscillator circuit
• Two power saving modes: STNBY and EC STOP
• Applications can use either a parallel CPU interface (DMA) or a CCB serial interface.
• Supply voltage: 2.7V to 3.6V
• CCB is a registered trademark of SANYO Semiconductor Co., Ltd.
• CCB is SANYO Semiconductor's original bus format. All bus addresses are managed by SANYO
Semiconductor for this format.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
's products or
equipment.
D1510HKIM 20101126-S00003/N1010HKIM 20100119-S00005 No.A1650-1/26