L9963T
Datasheet
Automotive general purpose SPI to isolated SPI transceiver
Features
•
•
•
•
•
AEC-Q100 qualified
Full ISO26262 compliant, ASIL-D systems ready
Compatible with both 3.3 V and 5 V logics
Supports both XFMR and Capacitive isolation
10 MHz SPI peripheral for SPI Slave operation. Configurable SPI frequency
(250 kHz to 8 MHz) for SPI Master operation
•
•
333 kbps and 2.66 Mbps Vertical InterFace (VIF) for isolated SPI communication
Low standby current
Application
•
•
•
•
•
Automotive: 48 V and high-voltage systems
Backup energy storage systems and UPS
Industrial communication networks
Portable and semi-portable equipment
Remote sensors
Description
L9963T is a general purpose SPI to isolated SPI transceiver intended to create a
communication bridge between devices located into different voltage domains.
Product status link
L9963T is able to transfer communication data incoming from a classical 4-wire
based SPI interface to a 2-wire isolated interface (and viceversa).
L9963T
Product summary
The transceiver supports both transformer and capacitive isolation, since the isolated
signal generated according to a proprietary protocol is suitable to be transmitted over
both decoupling circuitries.
Order code
Package
Packing
Tube
L9963T
SO16N
The device can be configured either as Slave or as Master of the SPI bus and
supports any protocol made of SPI frames 8 to 64 bit long. The transceiver manages
the transfer of the information without performing any protocol check.
L9963T-TR
Tape&Reel
Product label
SPI peripheral can work up to 10 MHz when configured as Slave. SPI clock
frequency can be programmed among (250 kHz; 1 MHz; 4 MHz; 8 MHz) when
configured as Master.
Isolated SPI peripheral features two different operating modes: slow @333 kbps and
fast @2.66 Mbps.
The asynchronicity between the two sides is internally managed, allowing all possible
configuration frequencies on both peripherals to be used in application.
L9963T features an internal queue of 3 slots for the frames received on the SPI port
and a queue of 20 slots for the ones received on the isolated SPI side. This allows
buffering and decoupling the two different clock domains.
The device is natively compatible with L9963 isolated SPI, allowing its usage in the
BMS applications.
L9963T is compatible with both 3.3 V and 5 V logics.
DS13590 - Rev 4 - July 2022
For further information contact your local STMicroelectronics sales office.
www.st.com