L9654
Quad squib driver and dual sensor interface
ASIC for safety application
Datasheet - production data
Support Manchester protocol for satellite
sensors
Supports for variable bit rate detection
Independent current limit and fault timer
shutdown protection for each satellite output
*$3*36ꢀꢁꢂꢃꢄ
Short to ground and short to battery detection
LQFP48
and reporting for each satellite channel
5.5 MHz SPI interface
Satellite message error detection
Low voltage internal reset
Features
4 deployment drivers sized to deliver 1.2 A
(min) for 2 ms (min) and 1.75 A (min) for
1ms (min).
2 kV ESD capability on all pins
Package: 48 lead LQFP
Technology: ST Proprietary BCD5s (0.57 μm)
Independently controlled high-side and low-
side MOS for diagnosis
Description
Analog output available for resistance
Squib short to ground, short to battery and
L9654 is intended to deploy up to 4 squibs and to
interface up to 2 satellites.
MOS diagnostic available on SPI register
Capability to deploy the squib with 1.2 A (min.)
or 1.75 A under 35 V load-dump condition and
the low-side MOS is shorted to ground
Squib drivers are sized to deploy 1.2 A (min.) for
2 ms (min.) during load dump and 1.75 A (min.)
for 1 ms (min.) during load dump.
Capability to deploy the squib with 1.2 A (min.)
Diagnostic of squib driver and squib resistance
measurement is controlled by micro controllers.
at 6.9 V V
and 1.75 A at 12 V V
.
RES
RES
Interface with 2 satellite sensors
Satellite interfaces support Manchester decoder
with variable bit rates.
Programmable independent current trip points
for each satellite channel
Table 1. Device summary
Order code
Package
Packing
L9654
LQFP48
LQFP48
Tray
L9654TR
Tape and reel
November 2013
DocID14218 Rev 3
1/59
This is information on a product in full production.
www.st.com