L9026
Datasheet
Automotive configurable multi-channel relay driver 2HS + 6HS/LS
Features
•
•
•
•
•
•
•
•
AEC-Q100 qualified
Full ISO26262 compliant, ASIL-B systems ready
Six configurable LS/HS drivers
Two High side drivers
2 parallel input pins with input mapping functionality
Cranking capability down to VBATT = 3 V
Digital supply voltage compatible with 3.3 V and 5 V microcontroller
VFQFPN32 exposed pad down
(5x5x1 mm)
Reverse battery protection on VBATT and on drain pins without external
components
•
BIM (bulb inrush mode) especially designed for drive resistive and capacitive
loads
•
•
Limp home mode (with usage of IDLE and IN pins)
Safety features
–
–
Temperature sensor and monitoring
Serial communications using address feedback, one parity bit, frame
counter and short frame detection
•
•
•
SPI interface 16-bit for outputs control and for diagnosis data communication
Package options: HTSSOP24, VFQFPN32
HTSSOP24 exposed pad down
(7.8x6.4x1 mm)
Green product (RoHS compliant)
Product status link
Description
L9026
The L9026 is an eight-channel IC, with two fixed HS drivers and six configurable
HS/LS drivers designed for automotive applications (LEDs and relays) and
compatible with resistive, inductive and capacitive loads. The device offers advanced
diagnostic and protection functionalities such as: short to GND, open load,
overcurrent, overtemperature detections. The eight output channels can be either
driven by SPI or by two dedicated parallel inputs. Limp home functionality is also
featured, which allows using two selected drivers in particularly faulty conditions,
such as SPI fault, micro fault or supply UV. Daisy chain compatible even with 8bit SPI
is available. The device is able to guarantee operations under a cranking scenario
down to VBATT = 3 V and guarantees very low quiescent current under RESET
condition.
Product summary
Order code
Package
Packing
L9026-B03N-TR
VFQFPN32
Tape and reel
L9026-YO-TR
HTSSOP24
Order code
Package
Packing
Tape and reel
L9026 has two input pins available connected to two outputs by default, in case of
using different or additional outputs, it is managed by SPI.
For a direct control and PWM L9026 has two input pins available connected to two
outputs by default, in case of manage different or additional output it is controlled by
SPI.
The device is available in two package versions: HTSSOP24 and VFQFPN32. Only
for the QFN package 2 additional pins are available for safety reasons. In details, the
NRES pin is used to reset internal registers to their default values and the DIS pin is
used to disable all channels.
DS13397 - Rev 8 - January 2023
For further information contact your local STMicroelectronics sales office.
www.st.com