5秒后页面跳转
L8560 PDF预览

L8560

更新时间: 2024-10-17 22:31:39
品牌 Logo 应用领域
杰尔 - AGERE /
页数 文件大小 规格书
46页 803K
描述
Low-Power SLIC with Ringing

L8560 数据手册

 浏览型号L8560的Datasheet PDF文件第2页浏览型号L8560的Datasheet PDF文件第3页浏览型号L8560的Datasheet PDF文件第4页浏览型号L8560的Datasheet PDF文件第5页浏览型号L8560的Datasheet PDF文件第6页浏览型号L8560的Datasheet PDF文件第7页 
Data Sheet  
April 2000  
L8560 Low-Power SLIC with Ringing  
Features  
Description  
Full-feature set for central office applications  
The L8560 full-feature, low-power subscriber line  
interface circuit (SLIC) is optimized for low power  
consumption while providing an extensive set of fea-  
tures. This part is ideal for ISDN terminal adapter  
applications and short-loop, power-sensitive applica-  
Also ideal for ISDN terminal adapters, pair gain,  
and cable telephony applications  
Auxiliary input for second battery, and internal  
switch to enable its use to save power in short tele-  
phone loops  
tions such as pair gain and cable telephony. This part  
is also designed for PBX, DLC, or CO applications.  
5 V only operation or optional ±5 V operation for  
reduced power consumption  
The SLIC includes an auxiliary battery input and a  
battery switch. In short-loop applications, SLICs can  
be used in high battery to present a high on-hook  
voltage, and then switched to low battery to reduce  
off-hook power.  
Low active power (85 mW typical) and scan power  
(61 mW typical) with 5 V only operation  
Low active power (68 mW typical with auxiliary bat-  
tery) and scan power (45 mW typical) with ±5 V  
operation  
To help minimize the required auxiliary battery volt-  
age, the dc feed resistance and overhead voltage are  
set at 55 and 6.7 V, respectively. This allows an  
undistorted on-hook transmission of a 3.14 dBm sig-  
nal into a 900 loop impedance.  
Quiet tip/ring polarity reversal  
Per-line ringing available for short loops  
Reduced overhead and increased current limit dur-  
ing ring mode for lower-battery operation or  
increased ring loop length  
The device offers the reverse battery function. Using  
the reverse battery, the device can provide a bal-  
anced power ring signal to tip and ring. In this  
mode of operation, the battery switch is used to  
apply a high-voltage battery during ringing and a  
lower-voltage battery during the talk and idle states.  
Also included in the L8560 is a dc current-limit  
switch, which increases the dc current limit during  
power ringing. In addition, dc overhead voltage is  
reduced during the ring state. With the battery and  
current-limit switches, and overhead reduction, the  
L8560 can provide sufficient power to ring a true  
North American 5 REN load of 1386 + 40 µF.  
Supports meter pulse injection  
Distortion-free full duplex from 0 mA dc loop cur-  
rent on-hook transmission  
Convenient operating states:  
— Forward powerup  
— Polarity reversal powerup  
— Forward sleep  
— Ground start  
— Disconnect  
Adjustable supervision functions:  
— Off-hook detector with longitudinal rejection  
— Ground key detector with longitudinal rejection  
— Ring trip detector  
The device offers ring trip and loop closure supervi-  
sion with 0.3 V and 2 mA hysteresis, respectively. It  
also includes the ground start state and ring ground  
detection. A summing node for meter pulse injection  
to 2.2 Vrms is also included. The 44-pin PLCC ver-  
sion also has a spare uncommitted op amp, which  
may be used for ac gain setting or meter pulse filter-  
ing.  
Independent, adjustable dc and ac parameters:  
— dc feed resistance (44-pin PLCC version)  
— Loop current limit  
Termination impedance  
Thermal protection  
 

与L8560相关器件

型号 品牌 获取价格 描述 数据表
L8561 UTC

获取价格

The UTC L8561 is a Power Factor Corrector, which can work in wide input voltage range appl
L8561_11 UTC

获取价格

POWER FACTOR CORRECTOR
L8561_15 UTC

获取价格

POWER FACTOR CORRECTOR
L8561G-D08-T UTC

获取价格

POWER FACTOR CORRECTOR
L8561G-S08-R UTC

获取价格

POWER FACTOR CORRECTOR
L8561G-S08-T UTC

获取价格

POWER FACTOR CORRECTOR
L8561L-D08-T UTC

获取价格

POWER FACTOR CORRECTOR
L8561L-S08-R UTC

获取价格

POWER FACTOR CORRECTOR
L8561L-S08-T UTC

获取价格

POWER FACTOR CORRECTOR
L8562 UTC

获取价格

The UTC L8562 is a Power Factor Corrector, which can work in wide input voltage range appl