COUNT
COUNT
DESCRIPTION OF REVISIONS
RE-6-2688
DATE
DESCRIPTION OF REVISIONS
CHKD
DATE
BY CHKD
S.J.H L.S.M
BY
2022.05.11
1
1
APPLICABLE STANDARD
Operating
Storage
-55℃ to 105℃ (Note1)
20% to 80% (Note2)
-10℃ to 60℃ (Note3)
40% to 70% (Note3)
100V AC/DC
Temperature Range
Operating Humidity
Temperature Range
Storage Humidity
Range
Range
RATING
Voltage
AWG 32 : 0.8A
AWG 28 : 1.0A
AWG 30 : 1.0A
Current
1
Applicable Connector
KW30-8P-1C(###)
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
General Examination
Marking
Visually and by measuring instrument.
Confirmed visually.
O
O
O
O
According to drawing.
ELECTRICAL CHARACTERISTICS
Contact Resistance
Millivolt Level Method
Insulation Resistance
Voltage Proof
20mV MAX, 10mA (DC or 1000Hz).
30 mΩ MAX.
O
-
250 V DC.
O
O
100 MΩ MIN.
-
-
500 V AC for 1 min.
No flashover or breakdown.
MECHANICAL CHARACTERISTICS
①Insertion Force : 26N MAX
It takes out and inserts with a conformity connector.
Mating and unmating
O
O
-
-
②Extraction Force : 3.1N MIN
force
Mechanical Operation
30 times insertion and extraction.
①Contact resistance : 50mΩ MAX
②No damage, crack or looseness of parts.
(Au Plating)
③Extraction Force : 3.1N MIN
Frequency 10 to 55 Hz, single amplitude 1.52 mm,
at 2 hours for 3 direction.
Acceleration 490 m/s2 duration of pulse 11 ms at
Vibration
Shock
①No electrical discontinuity of 1μs.
②Contact resistance : 50 mΩ MAX.
③No damage, crack or looseness of parts.
O
O
-
-
3times for 3 directions.
ENVIRONMENTAL CHARACTERISTICS
Damp Heat
Exposed at 40 ± 2 ℃ , humidity 90 to 95 %, 240 h.
①Contact resistance : 50 mΩ MAX.
②Insulation resistance : 100MΩ MIN.
③No damage, crack or looseness of parts.
①Contact resistance : 50 mΩ MAX.
②Insulation resistance : 100MΩ MIN.
③After Voltage proof test No flashover or
breakdown.
O
(Steady State)
-
Rapid Change of
Temperature
Temperatureꢀ-55 ℃ → 105 ℃
Time
30min → 30min
O
O
25 Cycles.
-
-
(The transferring time of the tank is 2 to 3 MIN)
(After leaving the room temperature for 1 to 2h.)
Exposedꢀatꢀ105±2 ℃, 250h
④No damage, crack or looseness of parts.
Dry Heat
Cold
Exposedꢀatꢀ-55±3 ℃, 250h
O
O
-
-
Corrosion, Salt Mist
Hydrogen Sulfide
Exposed in 35±2 % salt water spray for 48h.
Contact resistance : 50 mΩ MAX.
Contact resistance : 50 mΩ MAX.
Exposed in 40±2℃, humidity 80±5%
O
-
3±1 ppm for 96h.
Note 1: Include the temperature rising by current.
Note 2: No condensing
Note 3: Apply to the condition of long term storage for unused products before PCB on board. After PCB on board, operating temperature
and humidity range is applied for interim storage during transportation.
DRAWN
DESIGNED
CHECKED
APPROVED
Remark
RELEASED
S.W.CHOI
20.06.29
S.W.CHOI
20.06.29
S.M.LIM
20.06.30
S.M.LIM
20.06.30
Unless otherwise specified, refer to IEC 60512.
NOTE QT: QUALIFICATION TEST AT: ASSURANCE TEST O: APPLICABLE TEST
PART NO.
HIROSE KOREA CO.,LTD.
SPECIFICATION SHEET
KW30-8S-1H (800)
CL 6669-0009-5-800
F-1-021(Rev.1)
CODE NO.(OLD)
DRAWING NO.
CODE NO.
1
ELC4-633093
CL
2