Time Delay Relays
Dedicated - Retriggerable Single Shot
KRD9 SERIES
Description
The KRD9 Series microcontroller timing circuit provides
excellent repeat accuracy and stability. Cost effective approach
for OEM applications that require small size, isolation, reliability,
and long life.
Operation (Retriggerable Single Shot)
FunctionType A (Output Initially De-energized): Input
voltage must be applied prior to and during timing. When the
initiate switch is closed, (momentary or maintained) the output
energizes and the time delay starts. On completion of the delay,
the output de-energizes. The unit will time out if S1 remains in
the open or closed position for the full time delay. Reclosing
the initiate switch resets the time delay and restarts timing; the
output remains energized. The output will not energize if the
initiate switch is closed when input voltage is applied.
FunctionType B (Output Initially Energized): Upon application
of input voltage, the output energizes and the time delay starts.
At the end of the time delay, the load de-energizes. The unit will
time out if S1 remains in the open or closed position for the full
time delay. Closing (re-closing) the initiate switch resets the time
delay and restarts timing; the output remains energized.
Wiring Diagram
L1
N/L2
V = Voltage
S1 = Initiate Switch C = Common,
Transfer Contact
Reset:The time delay and the output are reset when input
voltage is removed.
UTL = Untimed Load (optional)
A knob is supplied for adjustable
Features & Benefits
units, or R terminals 4 & 5 for
T
FEATURES
BENEFITS
external adjust. See external
adjustment vs time delay chart.
The untimed load is optional.
Relay contacts are isolated.
Repeat Accuracy + / - 0.5%,
Factory calibration + / - 5%
Microcontroller based
Compact, low
cost design
Allows flexiblility for OEM applications and reduces
labor and component costs
Isolated, 10A, SPDT
output contacts
Allows control of loads for AC or DC voltages
Protects against shock, vibration, and humidity
Encapsulated circuitry
Accessories
P1004-95, P1004-95-X Versa-Pot
Panel mountable, industrial potentiometer
Ordering Information
recommended for remote time delay adjustment.
INPUT
VOLTAGE
FUNCTION
TYPE
MODEL
ADJUSTMENT TIME DELAY
P1023-6 Mounting bracket
The 90° orientation of mounting slots makes
installation/removal of modules quick and easy.
12VDC
KRD9120B
Onboard
Fixed
0.1 - 10s
15m
Energized
24VAC/DC
KRD92115MA
De-energized
Energized
KRD92115MB 24VAC/DC Fixed
KRD9220B 24VAC/DC Onboard
KRD93115MA 24VDC
KRD9423B 120VAC
15m
P0700-7 Versa-Knob
Designed for 0.25 in (6.35 mm) shaft of
Versa-Pot. Semi-gloss industrial black finish.
0.1 - 10s
15m
Energized
Fixed
De-energized
Energized
Onboard
0.1 - 10m
P1015-13 (AWG 10/12), P1015-64 (AWG 14/16)
Female Quick Connect
If you don’t find the part you need, call us for a custom product 800-843-8848
These 0.25 in. (6.35 mm) female terminals are
constructed with an insulator barrel to provide
strain relief.
© 2016 Littelfuse Protection Relays & Controls
www.littelfuse.com/krd9
Rev: 1-A-062216