COUNT
DESCRIPTION OF REVISIONS
DATE
COUNT
DESCRIPTION OF REVISIONS
DATE
BY
CHKD
BY
CHKD
4
RE-5-3103
K.C.J
Y.W.S
24.01.18
△
△
1
△
APPLICABLE STANDARD
OPERATING
TEMPERATURE RANGE
STORAGE
TEMPERATURE RANGE
-55℃ ~ +125℃ (NOTE1)
-10℃ TO 60℃ (NOTE2)
SIGNAL CONTACT : 50V AC
POWER CONTACT : 200V AC
RATING
VOLTAGE
CURRENT
STORAGE HUMIDITY RANGE
OPERATING HUMIDITY RANGE
RELATIVE HUMIDITY 85% MAX
(NOT DEWED)
SIGNAL CONTACT : 0.5A (NOTE3)
POWER CONTACT : 3.0A
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL
EXAMINATION
X
X
X
X
VISUALLY AND BY MEASURING INSTRUMENT
ACCORDING TO DRAWING
MARKING
ELECTRICAL CHARACTERISTICS
SIGNAL CONTACT : 50mΩ MAX
POWER CONTACT : 30mΩ MAX
CONTACT RESISTANCE 100mA(DC or 1000Hz)
X
X
X
-
-
INSULATION
RESISTANCE
SIGNAL CONTACT : 100V DC
POWER CONTACT : 250V DC
SIGNAL CONTACT : 100MΩ MIN
POWER CONTACT : 1000MΩ MIN
1
1
SIGNAL CONTACT : 150V AC FOR 1 min
POWER CONTACT : 600V AC FOR 1 min
VOLTAGE PROOF
NO FLASHOVER OR BREAKDOWN
X
MECHANICAL CHARACTERISTICS
INSERTION FORCE
INSERTION FORCE : 100N MAX
WITHDRAWAL FORCE : 8N MIN
MEASURED BY APPLICABLE CONNECTOR
X
X
-
-
WITHDRAWAL FORCE
① CONTACT RESISTANCE:
SIGNAL CONTACT : 70mΩ MAX
POWER CONTACT : 40mΩ MAX
MECHANICAL
OPERATION
100 TIMES INSERTIONS AND EXTRACTIONS
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS
FREQUENCY 10 TO 55 TO 10 Hz, APPROX 5min
SINGLE AMPLITUDE : 0.75mm,
10CYCLES FOR 3AXIAL DIRECTIONS
VIBRATION
SHOCK
X
X
-
-
① NO ELECTRICAL DISCONTINUITY OF 1μs
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS
490 ㎨ , DURATION OF PULSE 11ms AT 3TIMES FOR 3
BOTH AXIAL DIRECTIONS
ENVIRONMENTAL CHARACTERISTICS
① CONTACT RESISTANCE:
DAMP HEAT
(STEADY STATE)
EXPOSED AT 40±2℃, 90 ~ 95%, 96h
X
X
-
-
SIGNAL CONTACT : 70mΩ MAX
POWER CONTACT : 40mΩ MAX
② INSULATION RESISTANCE:
SIGNAL CONTACT : 100MΩ MIN
POWER CONTACT : 1000MΩ MIN
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS
TEMPERATURE -55 → +125℃, TIME 30 → 30 min
UNDER 5 CYCLES
(RELOCATION TIME TO CHAMBER: WITHIN 2~3MIN)
RAPID CHANGE OF
TEMPERATURE
1
① CONTACT RESISTANCE:
SIGNAL CONTACT : 70mΩ MAX
POWER CONTACT : 40mΩ MAX
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS
COLD
EXPOSED AT -55℃, 96h
EXPOSED AT 125℃, 96h
X
X
-
-
DRY HEAT
① NO DEFECT SUCH AS CORROSION WHICH IMPAIRS
THE FUNCTION OF CONNECTOR
② CONTACT RESISTANCE:
EXPOSED AT 25±2℃, 75±5%RH, 25 PPM FOR 96h
(TEST STANDARD: IEC 68)
SULFUR DIOXIDE
X
-
SIGNAL CONTACT : 70mΩ MAX
POWER CONTACT : 40mΩ MAX
1) REFLOW SOLDERING:
RESISTANCE TO
SOLDERING HEAT
PEAK TMP : 260℃ MAX
REFLOW TMP : 220℃ MIN FOR 60sec
2) SOLDERING IRONS : 360℃ MAX FOR 5sec
NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF
THE TERMINAL
X
X
-
-
SOLDERED AT SOLDER TEMPERATURE 240±3℃
FOR IMMERSION DURATION, 3sec
A NEW UNIFORM COATING OF SOLDER SHALL COVER A MINIMUM
OF 95% OF THE SURFACE BEING IMMERSED
SOLDERABILITY
REFERENCE DRAWING
REMARKS
DRAWN
DESIGNED
CHECKED
APPROVED
RELEASED
(NOTE1) : INCLUDE TEMPERATURE RISE CAUSED BY CURRENT-CARRYING.
(NOTE2) : "STORAGE" MEANS A LONG-TERM STORAGE STATE
FOR THE UNUSED PRODUCT BEFORE ASSEMBLY TO PCB.
(NOTE3) : WHEN THE SAME VALUE OF CURRENT ARE APPLIED TO ALL
CONTACTS AT THE SAME TIME IN ONCE, SET THE CURRENT TO
THE 70% OF HE RATED CURRENT VALUE.
ENG
20.03.20
DEPT
J.H.PARK
19.08.22
J.H.PARK
19.08.22
W.S.YOON
19.08.23
B.H.AN
19.08.23
UNLESS OTHERWISE SPECIFIED, REFER TO IEC 60512
NOTE QT: QUALIFICATION TEST, AT: ASSURANCE TEST, X: APPLICABLE TEST
PART NO.
CODE NO.
HIROSE KOREA CO.,LTD.
SPECIFICATION SHEET
KP27F-170S/4-0.5SV(800)
CL 6547-0012-4-800
CODE NO.(OLD)
DRAWING NO.
1
1
CL
ELC4-632773