Power entry modules without line filter
KP (FH)
https://www.schurter.com /PG05
IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole (5x20 mm)
Snap-in mounting
with fuseholder 1- or 2-pole
Sandwich/rear-side
Screw-on mounting
KPF Filter Module
(not enclosed)
C14
See below:
Approvals and Compliances
70° C
Description
Characteristics
- Panel mount :
Sandwich/rear-side
- 2 Functions :
- Panel mount from rear or "sandwich" between top and bottom/side to
side panels
PCB mount with snap-in or screw-on feet (self tapping screws Ø 3 x 8
mm)
- All single elements are already wired
- Fuse drawer not enclosed, it must be ordered separately (see required
accessories)
- Insulation cover on the rear-side
Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm
1- or 2-pole
- Meets the requirements of IEC 60335-1 for appliances in unattended
use. This includes the enhanced requirements of glow wire tests acc.
to IEC 60695-2-11 or -12 &-13.
- Suitable for use in equipment according to IEC/UL 62368-1
- For PCB mounting
Other versions on request
- Solder terminals
- Quick-connect terminals
- For protection class II
References
Alternative: version with line filter KPF
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
10A / 250VAC; 50Hz
10A / 250VAC; 60Hz
> 2.3kVAC between L-N
> 2.8kVAC between L/N-PE
(1min/50Hz)
Appliance inlet/-outlet
Fuseholder
C14 acc. to IEC 60320-1,
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10A, Protection Class I
1-/2-pole, Shocksafe category PC2
acc. to IEC 60127-6,
Allowable Operation Tempe-
rature
-25°C to 70°C
for fuse-links 5 x 20mm
Rated Power Acceptance @
Ta 23 °C
Power Acceptance @ Ta >
23°C
5 x 20: 2W (1 pole)/ 1.6W (2-pole) per
pole
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
IP-Protection
Protection against electric
shock
front side IP40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
For PCB mounting Quick connect termi-
nals 4.8 x 0.8 mm
Terminal
Solder terminal on request
Panel Thickness S
Material: Housing
Snap-in: 1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
1
Connectors