KBPC15005W-KBPC1510W
SILICON BRIDGE RECTIFIERS
VOLTAGE RANGE: 50 - 1000V
CURRENT: 15.0 A
Features
KBPC-15W
0.452
MAX.
(11.5)
!
Glass Passivated Die Construction
0.591
MAX.
(15.0)
! Low Reverse Leakage Current
0.042(1.10) DIA.
0.038(0.97)
!
Low Power Loss, High Efficiency
! Electrically Isolated Epoxy Case for
! Maximum Heat Dissipation
1.181(30.0)
1.102(28.0)
0.673(17.1)
0.633(16.1)
HOLE FOR
NO.8 SCREW
Mechanical Data
1.181(30.0)
1.102(28.0)
AC
!
!
Case: Epoxy Case with Heat Sink Internally
Mounted in the Bridge Encapsulation
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
Polarity: Symbols Marked on Case
Mounting: Through Hole for #10 Screw
Marking: Type Number
+
0.732(18.6)
0.692(17.6)
0.468(11.9)
0.429(10.9)
AC
-
0.732(18.6)
0.692(17.6)
0.033x.250
(0.8x6.4)
!
!
!
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
TA = 25ꢀC unless otherwise specified
For capacitive load, derate current by 20%.
Single phase, half wave, 60Hz, resistive or inductive load.
KBPC KBPC KBPC KBPC KBPC
1502W 1504W 1506W 1508W 1510W
KBPC KBPC
Unit
Symbol
Characteristic
15005W
1501W
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
VOLTS
VOLTS
VOLTS
50
35
50
100
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
70
Maximum DC blocking voltage
Maximum average forward output rectified
current at TC=55 C (Note 1,2)
Peak forward surge current
100
1000
I(AV)
15
Amps
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Amps
IFSM
300.0
A2s
I2t
Rating for Fusing(t<8.3ms)
373
1.1
Maximum instantaneous forward voltage dorp
per bridge element at 7.5A
Volts
VF
Maximum DC reverse current
at rated DC blocking voltage
TA=25 C
µ
A
10
1.0
IR
TA=100 C
mA
Isolation voltage from case to leads
Typical Thermal Resistance (Note 2)
Operating junction temperature range
storage temperature range
VISO
RθJA
TJ
VAC
C/W
C
2500
2.0
-65 to +150
-65 to +150
TSTG
C
NOTES:
1.Unit mounted on 5” x 4” x3” thick(12.8cmx10.2cmx7.3cm)Al.plate.
2.Bolt dowm on heat-sink with silicone thermal compound between bridge and mounting surface for
maximum heat transfer efficiency with #8 screw.
1 of 2
www.sunmate.tw