KBP005M thru KBP10M
Glass Passivated Single-Phase Bridge Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 1.5 Amperes
Features
ꢀ Ideal for printed circuit board
ꢀ High surge current capability
ꢀ High case dielectric strength
ꢀ Solder Dip 260 °C, 40 seconds
Mechanical Data
ꢀ Case: KBPM
Epoxy meets UL-94V-0 Flammability rating
ꢀ Terminals: Silver plated (E4 Suffix) leads, solderable per
J-STD-002B and JESD22-B102D
ꢀ Polarity: As marked on body
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for
Switching Power Supply, Home Appliances, Office Equipment, and
Telecommunication applicationsy
Package outline dimensions in inches (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25oC ambient temperature unless otherwise specified.
KBP005M
KBP01M
KBP02M
KBP04M
KBP06M
KBP08M
KBP10M
Parameter
Symbols
Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
Volts
Volts
Volts
Maximum DC blocking voltage
100
1000
Maximum average forward rectified output current
at TA=40oC
IF(AV)
1.5
Amps
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
50.0
30.0
IFSM
I2t
Amps
A2sec
Volts
Rating for fusing (t < 8.3ms)
10
1.0 (at 1.0A)
1.3 (at 1.57A)
Max. instantaneous forward voltage drop per element
VF
Maximum DC reverse current
TA=25oC
5.0
500
uA
pF
IR
at rated DC blocking voltage per element TA=125oC
Typical junction capacitance per element at 4.0V, 1MHz
CJ
15
RθJA
RθJL
40
13
Typical thermal resistance per leg (Note 1)
oC/W
oC
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
Notes:
1. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x12 mm) copper pads.
* JEDEC registered values
434