KBL005 thru KBL10
Single-Phase Bridge Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 4.0 Amperes
Features
ꢀ Ideal for printed circuit boards
ꢀ High surge current capability
ꢀ High case dielectric strength of 1500 VRMS
ꢀ Solder Dip 260 °C, 40 seconds
Mechanical Data
ꢀ Case: KBL
Epoxy meets UL-94V-0 Flammability rating
ꢀ Terminals: Silver plated (E4 Suffix) leads, solderable per
J-STD-002B and JESD22-B102D
ꢀ Polarity: As marked on body
ꢀ Mounting Torque: 10 cm-kg (8.8 inches-lbs) max.
ꢀ Recommended Torque: 5.7 cm-kg (5 inches-lbs)
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for
Monitor, TV, Printer, SMPS, Adapter, Audio equipment, and Home
Appliances applications
Package outline dimensions in inches (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25oC ambient temperature unless otherwise specified.
Parameter
Symbols
KBL005
KBL01
KBL02
KBL04
KBL06
KBL08
KBL10
Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
Volts
Volts
Volts
Maximum DC blocking voltage
100
1000
Maximum average forward output current
at TA=50oC
IF(AV)
4.0
Amps
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
VF
IR
200.0
1.1
Amps
Volts
Maximum instantaneous forward voltage drop per leg at 2.0A
Maximum DC reverse current
at rated DC blocking voltage per leg
TA=25oC
5.0
1.0
uA
mA
TA=125oC
(1)
RθJA
RθJL
19
2.4
Typical thermal resistance per leg
oC/W
oC
(2)
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
Notes:
1. Thermal resistance from junction to ambient with units mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Al. plate
2. Thermal resistance from junction to lead with units mounted on P.C.B. at 0.375" (9.5 mm) lead length and 0.5 x 0.5" (13 x 13 mm) copper pads
438