KBJL10J THRU KBJL10M
Glass passivated Single Phase Bridge Rectifiers
Reverse Voltage 600~1000V Output Current 10.0A
Features
◆ Thin Single In-Line package;
◆ Ideal for printed circuit boards;
◆ Glass Passivated chip junction;
◆ Low profile package;
◆ High Surge current capability;
◆ High case dielectric strength of 2000 VRMS
;
KBJL
◆ Plastic package has Underwrites Laboratory Flammability
Classification 94V-0;
◆ Same footprint V.S KBJ (3S) package;
Typical Applications
◆General purpose use in AC-to-DC bridge full wave rectification for Switching Power Supply, Home
Appliances, Office Equipment, Industrial Automation applications.
Mechanical Data
◆ Case: KBJL;Epoxy meets UL-94V-0 Flammability rating;
Base P/N with suffix"E" on packing code-halogen free;
◆ Terminals:Matte tin plated leads, solderable per J-STD-002 and JESD22-B102;E3 suffix for customer
grade, meet JESD 201 class 1A whisker test;
◆ High temperature soldering guaranteed: Solder Dip 270°C,10seconds;
◆ Polarity: As marked on body;
◆ Mounting Torgue: 5.7cm-kg (5.0 inches-lbs) max;
◆ Recommend Torgue:Mounting Torgue: 5.7cm-kg (5inches-lbs);
Maximum Ratings (TA = 25 °C unless otherwise noted)
KBJL10J
600
KBJL10K
800
KBJL10M
1000
Symbol
VRRM
VRMS
Unit
V
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS voltage
420
560
700
V
600
800
1000
Maximum DC blocking voltage
Maximum average forward rectified
output current at
VDC
V
10(1)
TC=110°C
TA=25°C
IF(AV)
A
3.1(2)
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
180
A
I2t
A2sec
°C
Rating for fusing(t<8.3ms)
135
Operating junction and storage temperature range
TJ, TSTG
- 55 to + 150
Electrical Characteristics (TA = 25 °C unless otherwise noted)
KBJL10J
KBJL10K
KBJL10M
Symbol
Unit
Parameter
Maximum instantaneous forward voltage drop per leg at
VF
0.98
Volts
5.0A
5.0
150
25
TA=25°C
Maximum DC reverse current at rated DC
blocking voltage per leg
IR
µA
TA=125°C
(2)
RθJA
Typical thermal resistance per leg
°C/W
(1,3)
1.8
RθJC
1). Unit case mounted on Al plate heatsink;
2). Units mounted on PCB without heatsink;
3). Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw.
www.goodark.com
1/4
2021.03-Ver.A